You are currently reviewing an older revision of this page.
Classification Types used by the application to determine behaviour of features and attributes. See for the sheet description.
Name
Parent
Use
Electric
Feature Commodity Type
Used by JDA to determine which features are displayed under the Electric folder in the tree view. Only top-level parents need be classified, as children will automatically be displayed.
Gas
Used by JDA to determine which features are displayed under the Gas folder in the tree view. Only top-level parents need be classified, as children will automatically be displayed.
Life Cycle Status
Used extensively by DA, for unit assignments, replace operations, deletions, and completions, among others. The Status attribute of each feature (and the global Status feature attribute) should be given this classification.
Tappable Feature
Used by DA to determine which features can be “tapped” from when placing trails.
End Point
Used by DA to determine if a tappable feature should be tapped from its closest end point when selected for a “Nearest Feature” type path. Point type feature should be classified as End Point. C.f. Any Point.
Any Point
Used by DA to determine if a tappable feature should be tapped from its closest point when selected for a “Nearest Feature” type path. C.f. End Point.
HasStructures
Used by DA. Features which are attached to a structure should be classified as HasStructures.
OHConductor
Used by DA for “Mid Span Tap” type paths. Overhead conductors should be classified as OHConductor.
UGConductor
Used by DA for “Mid Span Tap” type paths. Underground conductors should be classified as UGConductor.