Browse By Tags

  • Extract seed points.

    In this model the seed points created do not touch the ground, they are above or below the surface of the model, they are usually groups of three points only aligned at several places of the model away from each other. Next, there are the seed points…

  • COPY PASTE FROM ONE RASTER TO ANOTHER RASTER FILE

    One of my users ask me if there is a way to copy part of a raster image from one raster file, into another raster file using copy/paste. I have not found anything on the forums to indicate one way or the other, anyone have any ideas? He wants…

  • RE: Point Clouds for a newbie

    You can use Descartes "Smart Snap" to select the highest point along the top of rail to trace the rails or the 3D line follow tool if you have intensities to your point cloud. This will give you a rough horizontal alignment. fyi- InRoads ss3 has a …

  • RE: Point Clouds for a newbie

    Hi, The following channel has lots of videos that will aid you with your workflow. http://www.youtube.com/user/GeoSpatialAE Some specific videos to assist you with creating a dtm: Terrain from Point Cloud : https://www.youtube.com/watch?v=vVLDWyc7n_Q&list…

  • Create Section with Drape Element on Point Cloud (Descartes V8i SS4)

    Hi everyone, I've tried to drape a line element on a point cloud of a scanned cavity (see picture below) to generate a section through the cloud. Is there a way to avoid these spikes (red circle in the picture) by chosing something like a maximum distance…

  • Pointools, Descartes hardware guidelines?

    We have been looking at hardware specifications for use with Pointools (and probably Descartes SS4) processing large LiDAR surveys of buildings, but appropriate (as opposed to minimum) hardware specifications seem to be thin on the ground. The best…
Communities
Support and Services
Training and Learning
Social Media