Browse By Tags

  • 区块里面看到照片位置都是对的，生产计算出空三就出现分层，这种情况怎么处理呢

    区块里面看到照片位置都是对的，生产计算出空三就出现分层，这种情况怎么处理呢

  • 问题OPENGL ERROR openGL error.Please make sure your graphics card is compatible and check that the drivers are up-to-date.SeeContextCapture hardwarerecommandations for more information.[GPU_OpenGLError]

    openGL error.Please make sure your graphics card is compatible and check that the drivers are up-to-date.SeeContextCapture hardwarerecommandations for more information.[GPU_OpenGLError]

  • Does Capture Modeler support coordinate systems other than WGS84 and non-ellipsoid heights? (e.g., SPCS, NAVD88, etc)

    Does Capture Modeler support coordinate systems other than WGS84 and non-ellipsoid heights? I want to process photogrammetry/USA data acquired in NAD83(2011) ellipsoid and reference it to NAD83(2011) Texas South and NAVD88 (Geoid 18). Wondering if this…

  • Modelo de una Torre de comunicación

    Cómo puedo obtener mejores resultados en la restitución de un a torre de comunicación? Tengo una data de fotos que las he procesado en iTwin Capture y la estoy comparando con los resultados de la restitución con vHive. La foto 1 es el resultado de…

  • Trajectory file from Point Cloud and CSV input data

    Hi, I'm working on a large data sets with Nadir, Oblique and point Clouds but unfortunately for the point clouds I don't have a trajectory files. I was wondering if it's possible to recreate that specific data, I use LASinfo and see some GPS time…

  • CC导入激光雷达数据的问题

    问题背景 ：我们想自行搭建一套倾斜摄影+激光雷达的无人机采集设备，可以同时采集影像数据和点云数据，都带有GPS坐标系，这样可以把影像和点云直接导入CC进行建模。 点云采用mobile scan的形式导入，轨迹文件为带时间戳和WGS84坐标的轨迹，时间戳和点云已经匹配到一起了 激光雷达数据格式细节 ： 1. LAS1.2格式 2. 每帧点云数据已经对齐到每一帧最后一个点云的时间点，且这个时间点在轨迹文件中有对应记录 3. 点云内部的xyz数据单位为m，坐标系转成enu坐标系…

  • 您好，我想问一下，别人给了我一个高速公路服务区模型(.3mx)文件，我该怎么在OpenRoadsDesigner里操作才能编辑.3mx文件，以实现添加高架桥，或者道路拓宽等等，可以的话请为我推荐相关视频教程，十分感谢！

    您好，我想问一下，别人给了我一个高速公路服务区模型(.3mx)文件，我该怎么在OpenRoadsDesigner里操作才能编辑.3mx文件，以实现添加高架桥，或者道路拓宽等等，可以的话请为我推荐相关视频教程，十分感谢！

  • Building facades - poor quality

    I collected Nadir and Oblique photos of a residential area using DJI Matrice 300 and Zenmuse XT2- Most of the roofs look fine, but some of the houses facades look like they are melting. Any tips?

  • Poor mesh quality of building roof

    Hi All, I'm currently producing a model for a capture I did recently. Within the scope is the large sports center that has had its roof poorly reconstructed. I'm confident in the capture technique, as many other buildings within the scope have reconstructed…

  • EFCE Rotation is Unknown

    For some reason, the rotation values for the photos I took using my Zenmuse XT2 Thermal camera are "unknown". I've used the same camera in the past and ContextCapture was always able to recognize the rotation values. Any idea why this is happening?

  • Slow processing times when generating Orthophoto any tips ?

    As the title says, I'm having issues with processing time in creating Orthophotos. Basically from what I see is that I can get speeds of 6.9GP/hr. As we are processing lots of flights with 1500 @ 20Gp = 35GP, this could take hours. For ex. 446 photos…
  • PDF

    ContextCapture 2023 简体中文联机帮助

    • ContextCapture User Guide 2023.pdf
    • View

  • [CC] 3SM Model correlation to Ground Control Points

    Hi, I was wondering if there is a way to report how close 3SM production is to Ground Control Points. I use Control Points constraints option only for the AT for drone imagery with not perfect RTK to increase accuracy. There is a report of GCPs which…

  • ContextCapture 2023 版来了！

    ContextCapture 2023 更高的建模速度，新增基于实景的地形数据提取功能 生产效率提高 ContextCapture 2023优化硬件的利用，加快建模速度。新版本建模效率较上一Update20版本提高了25%。 利用新的平差模式，用户可以避免全部的pose数据参与计算，以此提高空三速度，且结果更优。 新增地形提取功能和窗口 （技术预览功能） 基于CC生成的实景模型或是点云,创建点云分类。利用ContextCapture Editor, Microstation或是第三方应用来基于分类后的点云生成地形模型…

  • input a ground scale factor

    Can you just input the ground scale factor to get the images on ground? Haven't seen that anywhere?

  • zoom in and zoom out limitation in web viewer

    hello, i want to create a limitation for zoom in and zoom out and orbit in the viewer for users. what should I do and if I should write a code, then where should I write? would you please help me? thank you

  • ContextCapture is now iTwin Capture Modeler

    Learn more about iTwin Capture Modeler --------------------------------------------------------------------------------------- ContextCapture 2023 Deliver faster, enhance your reality data and start your terrain layer creation in ContextCapture…

  • 请问是否有ContextCapture的中文教程

    老师您好，在bentley learn中只有关于ContextCapture的英文教程，是否能提供下中文教程的学习路径？

  • Adding some 3D objects causes the model to freeze!

    Hello everyone I spent a lot of time developing a project simulation. And I have never before had any lags or freezing with synchro as my laptop exceeds the software requirements. But suddenly after I added some 3D blocks to the model that serve as…

  • 有关“ContextCapture”软件能支持的显卡问题

    我现在要为CC软件购买一套工作站，但是不知道CC是否支持当前最新的RTX 4080显卡，或者说CC只要是显卡openGL版本大于2.6就可以支持还是只支持特定版本的显卡

  • Large processing job fails to access job queue but still completes task.

    I am cluster processing a large project to a networked drive and both engines work normally for a bit but then I get "Failed to access jobqueue for a while, please check jobqueue access" messages. It then reconnects and finishes the task. During the…

  • Punktwolke - Verwenden

    Hier finden Sie die Informationen zum Verwenden von Punktwolken aus der Microstation Hilfe: Verwenden von Punktwolken (bentley.com) Hier finden Sie eine Übersicht zur Arbeit mit Punktwolken in ContextCapture und OrbitGT: Context Insights detectors…

  • Touch up of reality mesh

    Is there any way that we can do touch up of mesh model in distributed manner? For the whole city, multiple users can be alloted tiles for quality checking and touch up the reality mesh to improve upon project delivery. Any way out?

  • Allow Annotations (notes taking) in ContextCapture Viewer

    Hello, Would it be possible to add note taking in ContextCapture Viewer? I am working on making 3D models of the seabed (underwater photogrammetry) with ContextCapture and I would like to be able to annotate my models with additional data (in addition…

  • recommended part hardware and best performance

    Hi, sorry for my english, my first language is spanish. i want to know what hardware part of pc is the most important to make a quickly process!, SSd, ram, cpu, board and /or gpu?????? with context capture! i have this computer: 2 Xeon Silver 4208 2…
Communities
Support and Services
Training and Learning
Social Media