Browse By Tags

  • Design Cross Slope report values is not matching.

    I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

  • Cross Section Annotation - Minimum Elevation Difference

    I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…

  • Is it possible to display ORD drainage on InRoads cross-sections?

    I am stuck with using InRoads cross-sections on a particular project, but I am considering re-creating the geometry and terrains in ORD and using ORD for the drainage design so I can take advantage of ORD efficiencies. But I must be able to display this…

  • Creation of new Cross Section Cells

    Hello, I was hoping someone could help me with trying to get a new cell used in the create cross sections tool. Under the "Corridor Modeling" tab, Using the "Create Cross Sections" Tool From the "Sheet" Folder There is an option to utilize…

  • Cross sections from ASCII file

    Hi, I would like to create cross sections in specific chainagas, I wouldn't do it one by one, so I put list of values to text file and try to use ASCi option Problem is I created few sections as on file, but I can't see terrain model line in that…

  • Unable to Masscalculate with Corridor Modeling

    Hi I have problem to solve mass calculation when I construct a ramp with corridor modeling. There are some of the masses that are not calculated. I think there is something with the Template that I not see the solution of. Any other that have this…

  • Inserting cross sections

    Using Power InRoads V8i SS2 - V08.11.07.615 I would like to cut new cross sections and add them to an existing set. Is there a way for InRoads to sheet out the sections in order like Geopak? Thanks!

  • Commands Missing in InRoads explorer (V8i SELECTseries 3)

    Hello all, I have been engaging in video tutorials using the inRoads explorer for MicroStation V8i SELECTseries 3. The instructor of the tutorial that I am currently using is utilizing SELECTseries 2. What I notice is a discrepancy between the commands…

  • Inroads: Vertical alignment point on Cross Section & Intervals

    Microstation: 08.11.07.443 (SS2) InRoads: 08.11.07.566 (SS2) I have an existing surface, and I created a proposed horizontal and vertical roadway alignment (no proposed surface yet). How can I get InRoads to plot a point at the vertical curve elevation…

  • Video: Create Cross Sections in SS3

    Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Cross Sections Original Author: Jacquelyn Pettus, Bentley Technical Support Group This video demonstrates how to create cross sections in InRoads SS3. Click…

  • Component Display in Cross Sections

    Product(s): InRoads Version(s): 08.11.07.615 Area: Cross Sections Original Author: Chris Key, Bentley Technical Support Group Problem: When displaying cross sections from an alignment which differs from the alignment…

  • Cross Sections Will Not Stack

    Applies To Product(s): InRoads Version(s): 08.11.09.493 Environment: N/A Area: Cross Sections Subarea: Original Author: Jacquelyn…

  • Can you import modified components from cross sections into a Surface?

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Chris…

  • Cross Section option is missing in SS2

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Chris…

  • Create a Surface DTM from Graphics Drawn in a Cross Section

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Chris Key, Bentley Technical Support Group …

  • Export Cross Section Tab Missing from the LandXML Translator

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Jacquelyn…

  • Contract and Expand Options for Explorer Windows

    Applies To Product(s): InRoads Version(s): 08.11.09.493 Environment: N/A Area: General Subarea: Original Author: Chris Key…

  • Display Line in Plan View Representing Cross Section

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Jacquelyn…

  • InRoads Cross Section Set Names Appear as Chinese Letters

    Applies To Product(s): InRoads Version(s): 08.09.03.06 Environment: N/A Area: Cross Sections Subarea: Original Author: Chris Key, Bentley Technical Support Group …

  • Surface Line Not Displayed in Cross Section

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Jacquelyn…

  • Different Results Annotating Points in Cross Section

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Andrea…

  • Add Window Clearance in Cross Sections

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Jacquelyn…

  • Surface from Cross Sections

    Applies To Product(s): InRoads Version(s): 08.11.07.615 Environment: N/A Area: Cross Sections Subarea: Original Author: Sanders…

  • Plan and profile Generation_H alg with different scale

    Hi Firendzzzzzzzzzz, I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500. I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…

  • Tentative Vertical Alignment and Cross Sections

    Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…
Communities
Support and Services
Training and Learning
Social Media