Browse By Tags

  • CSSC Using Models

    Morning - I'm having a slight issue with developing some cross sections. I have a chain that is 2700+00 in length. There are roughly (10) segments on this chain that I would like to cut cross sections for separately (i.e. 0+00 to 24+00, 166+00…

  • Re: Inroads XM: Cross section surface extends off the top of window

    Tim, Do you have 'Show Data Outside Elevation Range' toggled on the General leaf of the Create Cross Section dialog? If so, toggle that off. Thanks, Jason Smithey

  • Re: Annotate Storm and Sanitary in Cross Section

    Marc, Go to Drafting> Place Cross Section Note. In the bottom, right hand corner of the dialog, click the black arrow to expand the dialog. Under Inserts, you should see Storm and Sanitary Structures. Add the desired inserts to a new or existing…

  • Roadway Designer generated Cross Sections - not displaying cilps or other cooridors, components

    Working in MX v8i SS2 - 08.11.07.536 - Roadway Designer. I have a scheme with a Main line and Side Road corridor which clips it. The resultant surface looks correct showing the main line being clipped by the side road, components look good as well...…

  • Cross Sections Components Not Displaying

    Hello, I am having trouble with some components in my cross sections not displaying. I have check the styles to make sure the display options are correct and they are since I have components of the same style displaying at different stations. Everything…

  • Annotate Sections - Areas without points

    Hi guys, Recently we came upon a problem where the contractor wanted us to report on changes in the elevation of the existing surface, areas where we had no determined points. The image below shows the OG and our Muskeg surface. The below…

  • Corridor Modeler Template display - slopes

    When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…

  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…

  • SS3 Geopak - "Solid by Extrusion Along" not appearing on cross sections

    I created a 3d element using "Solid by Extrusion Along" The element represents a pipe with thickness. I have the element displayed while creating cross sections but the element does not appear. I created a solid pipe and it does appear. …

  • Cross Section Output

    Hi guys, My boss has asked me to look into this one. A Contractor on a recent job informed him of receiving a Cross-Section package of 11x17 drawings with each cross section on each individual sheet, containing all volume and annotation information…

  • Geopak SS3 - Is there a way to Annotate the Cross Sections while using the "Sheet" option?

    I am confused how to create cross sections sheets with annotation using Geopak SS3. Using the Create Cross Section tool the following Preferences are offered. Create Cross Sections Create Cross Section Preferences Sheet Sheet – w/o Grid…
Communities
Support and Services
Training and Learning
Social Media