Browse By Tags

  • Cannot see the applied DTM in Map of Bentley OpenFlows FLOOD.

    Product(s): Bentley® OpenFlows FLOOD Version(s): 10.00.02.01 Area: Layout and Data Input Problem The applied DTM cannot be seen in the Map of Bentley® OpenFlows FLOOD Solution This issue can occur when you don’t have…

  • Video: Export terrain model to InRoads dtm in OpenRoads Designer

    Product(s): OpenRoads Designer Connect Edition Version(s): 10.00.00+ Area: Terrain Model Original Author: Bentley Technical Support Group Click the video below to play it. To view in fullscreen mode, first click the…

  • Import Trimble surface file (.ttm) into OpenRoads

    Can I import a Trimble surface file (.ttm) into OpenRoads?

  • How to create a digital terrain model in OpenFlows FLOOD

    Product(s): OpenFlows TM FLOOD TM Version(s): 10.XX.XX.XX Area: Modeling Overview This tech-note explains how to create a Digital Terrain Model in OpenFlows FLOOD. Background To create a digital terrain model in OpenFlows…

  • How do i export a DTM from inroads as it currently looks?

    How do i export my DTM from inroads as the edited version and not the one it creates initially. ive made adjustments to the one i have but when i export it and then re import to check it looks like just as it did when i first made it.

  • Profile Creation Problem in Power Civil

    Hi good day to all, iam very new in Bentley applications. I created some alignments and surface. After that when I am trying to create a profile, it shows “NO TRANGLES FOUND IN SURFACE” could anybody please help. Regards DK

  • Change detection through ContextCapture Models

    Is it possible to obtain change detection information from successive reality models of the same site using the same parameters for data acquisition? For instance, if we were to create successive models of a construction site, is there some way to depict…

  • Micsrostation Power InRoads V8i Select series 4 - DTM to XYZ Text File

    I am trying to establish a method to get DTM surface information into a suitable XYZ file format. Is there any direct method to convert DTM file to TXT/csv format from Power Inroad? Or, is it possible to achieve somehow?

  • Is there a way to open old .dtm files?

    I am trying to open old .dtm files created in 1995 but InRoads says it is an invalid file format. I am using Inroads V8i SelectSeries 2 Version 08.11.07.566. Any help or direction would be appreciated. Thank you, Keith

  • Civil 3D to SewerGEMS Terrain Model

    XMLFile.xml I have a Civil 3D surface which I want to use as Terrain Model in SewerGEMS. I have exported the Civil 3D surface as DEM but SewerGEMS asks for DTM and does not import DEM. I have exported the Civil 3D surface as XML but SewerGEMS…

  • "InRoads digital terrain model (DTM)" vs .TIN

    A client wants us to provide them with an InRoads digital terrain model (DTM) for a project we are doing. However, we are only used to creating ".tin" files using the build DTM tool in our "ODOT cadd Power GEOPAK SS4" version of microstation. is there…

  • Consuming ContextCapture production files within your hydraulic model

    Product(s): WaterCAD; WaterGEMS; SewerCAD; SewerGEMS; StormCAD; CivilStorm and HAMMER Version(s): 10.00.xx.xx Area: Modeling Overview This post will present how ContexCapture's final information can enhance your hydraulic…

  • Problems with Lidar and Terrain Model

    Currently trying to use Lidar data (.las) from the state of KY to make an inroads DTM. When trying to import into inroads SS2 the coordinates and elevations are way off. I tried to import in SS4 using the "Create From File" civil terrain tool. This will…

  • Draping a Raster file on a solid or DTM

    Product: MicroStation Version: 10.xx.xx.xxx Environment: N\A Area: Visualization Subarea: Materials Background You might need a Raster image to drape on a DTM, a solid, or a mesh. Steps to…

  • draw mesh

    hi, i'm beginner in bentley substation select series 7 my question is how we can draw simple DTM thanks in advance

  • RE: Bentley Map for Contour Generation.

    Videet, Contour capabilities are available in Bentley Map Enterprise , through the Scalable Terrain Model functionality. These tools are located in the Raster Manager dialog box, in the Utilities menu. Bentley Map does not include the Descartes…

  • Geopak Drainage Referenced surface profile

    I have a drainage profile that spans across 2 surfaces. The nodes are referencing their respective surface as seen in the attached image (see highlighted elevations). The Surface profile is drawn at a total different elevation. I have created a surface…

  • Using Downstream Trace and Digital Terrain Models

    Product(s): StormCAD, SewerGEMS, CivilStorm, SewerCAD Version(s): CONNECT Edition, V8i SELECT Series 4 (08.11.04.54) and later Area: Modeling Background The ability to attach Digital Terrain Models and the Downstream Trace…

  • LandXML Terrain Model does not obey boundary lines

    Product(s): StormCAD, SewerGEMS, CivilStorm Version(s): 10.00.00.40 Area: Layout and Data Input Problem When using a LandXML file in the Terrain Model tool, the boundary lines are not respected. Contour lines are shown beyond…

  • Drape 2d dgn elements onto GEOPAK TIN file - How to?

    I need to drape 2d dgn lines and curves onto Geopak TIN file? I found the tool but sure about the settings and workflow. Did a search of the Geopak help files did not produce results. The work is very distilled below: 1. Client provides source files…

  • RE: Can WaterCad import survey files?

    Regan, WaterCAD has the capabilities to model what you're asking about using a DGN or DTM file. The elevations from your survey drawings, depending on the format of the drawings, can be extracted to the node elements in the model using the Terrain Extractor…

  • Opening a model file the error "Method requires triangulated DTM" is generated

    Product(s): WaterGEMS, WaterCAD, SewerGEMS, SewerCAD, Civilstorm Version(s): 10.XX.XX.XX Area: Data Input Problem When opening a model file the error "Method requires triangulated DTM" appears, followed by "object reference…

  • ORD Deleting DTM/Terrain Surface Spikes to Zero

    Hello All, I am looking for the workflow for deleting out spikes to zero within a DTM/Terrain in ORD. Any help with this is much appreciated.

  • Save time with automatic catchment delineation

    If you're a civil engineer working in the field of site drainage design, you have likely had the need to create catchments based on site topology. The good news is that the days of sharpening your red pencil and manually creating these delineation lines…

  • Using Catchment Delineation

    Product(s): SewerGEMS, CivilStorm, StormCAD, SewerCAD Version(s): CONNECT Edition and higher Area: Layout and Data Input Background This article contains common workflows for using the Catchment Delineation tool. Catchment…
Communities
Support and Services
Training and Learning
Social Media