Browse By Tags

I am using Uk standards Library for designing Stormwater drains. How do I add a new Feature definition/ Cell Library which is not in the Cell Library for a new Chamber (image attached for reference) in ORD. I tried using the Add New Template option and…

In GEOPAK is there a simple way to divide a complex chain into equal length segments? I have a chain that is comprised of a line segment and curve. I would like to be able to divide the chain similar to dividing a line or curve without doing so segmentally…

I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min…

Creating and Managing Line Styles , where do you start? Discover this and more at the next MicroStation V8i Special Interest Group (SIG) virtual workshop on Tuesday, March 27, 2018. Convenient one-hour sessions are set for 11 a.m. EDT or 7 p.m. EDT .…

Hi all, I have been trying to use Microstation Connect Constraints with OpenRoads Designer geometry with no apparent issues except having to nudge the geometry (by slightly extending, moving, etc.) to sync the OpenRoads geometry (ie. 3d) with the…

Hi all, I have been trying to use Microstation Connect Constraints with OpenRoads Designer geometry with no apparent issues except having to nudge the geometry (by slightly extending, moving, etc.) to sync the OpenRoads geometry (ie. 3d) with the…

i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…

i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…

Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…

Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…

Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…

Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…

I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…

Hi. excuse my poor english :-( When I open a cell using element -> cells i can right click on a cell and open it to modify the contents i can modify all items in the selected cell... i'm working in a v7 to v8 migration, and i have a little cell…

Sometimes in Inroads XM we have noticed an error that occurs with tracking horizontal alignments. After a horizontal alignment has been established and has been used for months, there have been times when you open a drawing in Microstation V8 (a drawing…

Problem... After I visualize my Geopak elements more than a few times the visualization stops working. In order to use visualization I have exit Microstation and start another session. This is extremely unproductive and happens quite often. Further…

I created a geopak chain for a ramp I am designing using the store graphics tool. The ramp has a compound curve in the alignment. When I run my shape text file through the compound curve, the shape file draws an odd shape not associated with the alignment…