Browse By Tags

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…

Hi, First time asking a question on Bentley Communities. Recently I noticed that the Site modeller functionality of my Inroads is no longer available and I did not see it in the Add-Ins window. This mostly affects cross sections and corridor work…

I am running InRoads SS4. I am trying to calculate cut but only in a certain part of the road. I have changed my template so I can ignore the components I need to in order to get that certain section. My issue is the following: there is a column in the…

I have been looking for this for a long time, and now it's time to ask the question to the people who might know the answer. I work with several seabed DTMs and often create profiles to view vertical shifts. Mostly I have one design survey with lots…

Hello, I have an existing alignment that I am using as a center line to cut my cross sections, and I have a second alignment (edge of road) that I need to show as a point on the cross section. I need to show the distance and elevation of the second…

Hi guys, I was working on my xin, trying to create a 11x17 section sheet in my cross section preferences, and now the axis text for my standard roll is about 200 times bigger than it should be. Using an old Xin I have been matching the setting and…

I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…

Hi Guys, I'm wondering if you can help... We're currenly working on a design and build job, which consists of a number of Treatment Areas that need to be dug out and replaced because the existing road base/surface has failed. Now, because some…

Just curious, thanks in advance... Using MicroStation V8i SS3, V08.11.09.397. InRoads V8i SS2, V08.11.07.615. Multiple sections, files, and users experiencing the same issue. After creating a storm system SDB for a proposed drainage network, I'm…

I am using Inroads V8i (Selectseries 2) V08.11.07.428 When cutting cross sections with this version of inroads components are not displayed if any point within that component is not within the left and right offsets of the cross section. You would…