Browse By Tags

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

Good day all, We are having to import a topo survey we processed/cleaned up in InRoads into Civil3d per client request. We took the data from the .fwd and exported as a text file, saved as a .csv so that the points can be imported into Civil 3d. What…

It seems fine at the physical computer (I was using it earlier today), but when I use Bentley InRoads Suite SS4 (MicroStation SS4) through a remote connection, the top of the Tasks dialog box is bigger yet empty, not allowing me to change tasks with a…

Greetings, Does anyone know if ORD has the Select by Attributes tool like MS V8i had (under Edit->Select B y Attributes)? Say i want to select cells by their names... is there a tool for that? I searched the help and this forum and didn't find any results…

Regular_Seed.dgn file_breaking_seed.dgn Hey there, So, I have our seed, and our client's seed. I am trying to figure out where to find the variable that is causing these sue/suda nodes and conduits to place way out in left field, when the…

Good Afternoon Folks, Has anyone converted their configuration from "MicroStation" & "InRoads" to "Power InRoads"? Any experience you're willing to share would be greatly appreciated. Thanks, and have a Great Labor Day Weekend,

Hello Folks, Has anyone experimented with running InRoads SS2 over MicroStation SS10? If you have, what has been your experience? Thanks and have a good evening,

Hi, First time asking a question on Bentley Communities. Recently I noticed that the Site modeller functionality of my Inroads is no longer available and I did not see it in the Add-Ins window. This mostly affects cross sections and corridor work…

I would like to use the InRoads Bridge Geometry tools to quickly layout girders on a tightly curved bridge. This would be a very useful tool if I could get it to work. Instead of manually drawing girder lines and checking max/min deck overhang, max/min…

Hello, I am using PowerGEOPAK SS4 and my dgn file has about 15 models so it takes forever to close a file (at least 5-10 minutes) because of the Status "Scanning Model: x" dialogue box that goes through every single model. Does anyone have the same…

I have cross sections that I'm satisfied with but the annotation isn't cooperating the way I'd expect. I have selected the centerline (as well as BOC_Top, see attached image) as a crossing feature and it displays the circle in the correct location within…

Hello everyone, I will design an alignment for an oil pipeline. And the project requires 3D stationing. I found the 3D alignment task but is there a way to annotate in 3D? I am using InRoads V8i SS2. Thanks in advance.

Dear All I have thee doubts in BRT. 1. I am importing survey data and creating surface. and I am creating a Horizontal alignment. My doubt is I need a Tentative Vertical based on the ground surface. is it possible or not. 2. I have a Cross…

Dear all, I am using BRT V8i with microstaion V8i Select services-2 in the i am facing a small prblem i.e when i am using BRT command Like Move PI,Insert Pi when moving the geometry Alignment if i use microstation snaping tools to snap with end…

Hallo, i want to create a surface in the roadway modeler using an alternative surface option.But I want this surface to be perpendicular to the profile. For example the point for the alternative surface is at 1m distance from the vertical alignment, I…

Dear All, I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations, for rail elevation again i am going to auto cad. I am creating a horizontal…

I have a data that contains the Coordinates of Beginning of Project, Tangent to spiral, Spiral to curve, Curve to Spiral, Spiral to tangent, radius of curve, length of curve, length of clothoid and I want to create an alignment from this points by importing…

i prepared a grid of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…

i prepared a greed of lines and i wanted to place the profile inside the grids since the alignments are all short segments for a station yard with a small length and i want to have some kind of order for my review. so what happened was in the past i was…

My company is trying to develop a way to utilize the intelligent Civil 3D Pipe Networks, but we are required by most of our clients to display all of our data in a 3D model in Microstation. I am trying to create a workflow to convert Civil 3D 2012 Pipe…

I am looking at calculating time of concentration in InRoads Storm & Sanitary. Using the FAA method, you are asked to give K1, which is stated as a "regional constant". Where can I find the relevant regional constants? Thanks, Jenna

Hello there! I have this issue, when i was done creating a surface (dtm) using Inroads, i wanted to view the low/high points of that surface, so is there any way to view them using InRoads??? Thanks & Regards, Imad Balich

I am using MicroStation V8i (SS2) InRoads (SS2) and need to adjust some cogo points elevations by a specific distance. For example, if I have a group of points with different elevations that I would like to raise or lower by 3" is there an easy way to…