Browse By Tags

  • MOSES simulation for RAO

    Good morning, I was hoping someone could provide me some information to improve my understanding on how MOSES works. I am currently using MOSES to find the forces on a cargo and comparing this with a manual hand calculation. My questions are: 1…
  • &LOOP in TDOM for Multiple ENV Condition

    Hi, I want to ask regarding loop command for time domain analysis. let say the enviroment are set for different heading at each loop and we run the time domain analysis (env 1)...at time 12800, the position of the vessel will be offset from it original…
  • Multiframe - Deflection Legend

    Product(s): MAXSURF Multiframe Version(s): 23.07.00.268 Area: Plot View Problem The legend, when viewing the results on deflection, cannot be adjusted and will automatically stay in the maximum value. How to change it in…
  • USING ONE HYDRODYNAMIC DATABASE FOR MOORING ANALYSIS

    Hi, I am currently looking into API2sk example, i see that the SHUTANK model are using the database from e_total, mod.dat. Let say I create a fine mesh (1m) and run some hydrodynamics and agreed that the RAO are acceptable. Can I just used the database…
  • MOSES POST PROCESS RESULTS

    Dear All, I am trying to post process some result from moses. I want to ask if theres a way to present the magnitude all in 1 page instead of creating a page break so it is easier to extract the values. Hope you understand the question. Thanks! …
  • MANEUVERING ANALYSIS WITH MOSES

    Dear all, I want to ask if it is possible to perform maneuvering analysis with moses or moses motion software i.e (turning circe, crash stop, zig-zag, stopping inertia). if yes, appreciate if you can give any sample file for reference. Thank you.
  • MOSES Modeler Meshing

    Hi, Refer to attached picture, I want to ask why Moses create a trimesh for some panel even if the mesh quad option is checked? is it possible to have all quad mesh for simple shape structure? Thanks.
  • *** WARNING: Cannot Compute Zero Frequency Added Mass

    *** WARNING: Cannot Compute Zero Frequency Added Mass i have set -do_zfam code,but the MOSES log file cannot compute .
  • MOSES's Obstacle

    Hi MOSES user, I’m trying to simulate side by side of two identical ships using “Obstacle” option ( Fig.1 ). I put -obstacle after describe piece of vessel Bc (Bc.ppo file attached). I compute &weight for both vessels and check the equilibrium status…
  • MOSES VESSEL MODELLING - WAVE DRIFT FORCES

    Hello, this is a fairly simple question but is a crucial one. I believe there's 3 way you can create a model in moses OPTION1. Strip modelling with PGEN OPTION2.MOSES modeler model (MOSES object) OPTION3.Panel model (Union meshing - Oldshool…
  • moses motions statistics along different reference system

    I'm trying to post-process a frequency-domain analysis. In particular, in the attached example, the command fp_std *BT12 produces the RAOs on point *BT12 of the body "barge" along the body axes. Clearly also the motions statistics for the enviroment…
  • Silent install method for SACS and MOSES

    Hello, we are trying to automate the install for SACS Connect Edition 14.1 and MOSES Connect Edition 11.02. Please provide the silent install switches including how to specify the install directory.
  • Ochi Hubble Wave Spectrum

    How to use/model Ochi Hubble wave spectrum in MOSES. Is it possible?
  • DETERMINING CHAIN LENGH BASED ON PRETENSION VALUE (MOSES)

    Hi, I would like to ask how to find the length of chain based on given pretension value and anchor radius. Understand that moses are required to input the length i,e: $CLUSTER 1 $ ------- SET OF MOORING CHAIN PARAMETER ----------------- $CHAIN …
  • how to specify mesh size in moses ?

    I'm trying to give mesh for my model. On what bases we have to specify mesh size?
  • Moses Ship Launch Simulation

    Hi, I am currently working on Ship Launch Simulation, I had created Ship Geometry model and Ship Launch model and Prepared .dat file from MOSES Modeller. I find most of the manuals and tutorials are referring to Jacket Launch. I am trying to connect…
  • HOW TO GENERATE SEA STATE RAO IN MOSES?

    Dear Georgina, Kindly advise how to generate sea state RAO in MOSES.
  • MESH PANEL MODEL IMPORT (MOSES)

    Hi, I am trying to convert an AQWA mesh to MOSES. Appreciate if you can advise why the result for buoyancy seem to be negative? and what need to be corrected? Thanks
  • Lifting Stability for decommisoning barge

    Hy everyone Im just try to use moses executive for my final assessment but i dont know how to use it , i wanna ask how to use code and to make lifting stability in moses executive maybe someone can help? Best regards, Alan
  • Converting moses modeler to executive

    Hello Everyone. I am new into moses. I have save my mesh into dat.file and use it as model data in analysis. When I want to use it in moses executive, my model didn't appear properly. Can you tell me how to fix this? Thank You, Michael
  • Orientation of Part (MOSES)

    Hi, I would like to ask regarding how the orientation in MOSES works, and what is the difference between using the following Method 1: "in dat file" $ ---------- INSERT BARGE DATA ------------ &DESCRIBE BODY %VNAME &INSERT barge.dat $ -----…
  • Jacket Barge Loadout Sample File (MOSES)

    Hi, where can i find the sample file for loadout jacket from quayside to moored barge.
  • MOSES COG SHIFT

    Hi Bentley. I have a question about CoG shift in MOSES. is there a Command or method to do CoG Shift Variation during Lifting/Lowering/Upending Analysis in MOSES, without modify the SACS converted Model. Many Thanks, Argo
  • Lacking Damage Case at the Damage Case Window

    Product(s): MAXSURF Stability Version(s): 23.06.00.137 Area: Damage Stability Problem When opening the Damage Case Window, the damage case does not appear in its column and the file looks empty. What can I do? Solution…