Browse By Tags

  • 06. AutoPIPE: Scale / Mirror Command

    The Home > Operations > Scale command enables the user to multiply point offsets in a range by a user-defined scale factor. Notes: 1. Negative values will mirror the points along the specified axis. 2. Beams and piping are scaled differently and therefore…

  • How do I Mirror a Corridor Template

    test7.dgn Original Ground.dtm Hello, I have a drawing where I am creating an intersection over terrain. I am in the process of creating alignments with profiles at each of the 4 corners for each of the flowlines and back of sidewalks (shown in red). …

  • Mirroring objects

    Hi, does anyone found a way of mirroring objects? As I've made a whole model, made calcualtions and only after that found that it's mirrored. It's mirrored because I imported geometry from Autocad and swaped axes from x to y. There is a problem with…

  • Bug in Mirror Command Default Selections

    Bug in Mirror Command Default Selections When I use the mirror button from the tools ribbon, it remembers my previous selections of the tool. The default options appear to be whatever was last used. (ie. the "mirror direction" is "line", "horizontal…

  • Need to Understand 2D Cell Rotation Angle When Cell is Mirrored About the Y-axis

    Hi All, I have a program that needs to unrotate a 2D cell to 0 deg/no reflection which has been placed at any rotation angle and/or mirrored about the X- and/or Y-axis. Specifically, the problem I'm having is when the cell has been mirrored about…

  • Need to Understand 2D Cell Rotation Angle When Cell is Mirrored About the Y-axis

    Hi All, I have a program that needs to unrotate a 2D cell to 0 deg/no reflection which has been placed at any rotation angle and/or mirrored about the X- and/or Y-axis. Specifically, the problem I'm having is when the cell has been mirrored about…

  • How to Mirror or Rotate a Custom Equipment or Component while Placement

    Applies To OpenPlant PID Product(s): OpenPlant PID Version(s): 08.11.11.319 Environment: Windows 7/8.1/10 (64 bit) Area: Customization Subarea: Placement Original Author: Soham Mhaskar, Bentley Product…

  • Microstation V8 cell text mirrors when updated?

    I have created a room cell for a flat layout that gets mirrored several times within each floor of a building. When the cell is initially mirrored the text doesn't mirror as the mirror text setting is off and this is fine. However, when the cell is changed…

  • Mirrored slab - unable to edit after one manipulation

    Can anyone verify if this is also a problem or is it only us experiencing this issue: draw a slab using the PLACE FLOOR SLAB TOOL or PLACE SLAB FORM; mirror it using the MIRROR command (Manipulate tool box); select it, the manipulation handles…

  • RE: why can not manipulate custom component?

    Hi Wang, For gap in component and pipe run, please refer below wiki article. There is a setting in schema which will resolve this problem. For Mirror & Rotate, the fields which you have highlighted are no longer used. There are different properties…

  • RE: Mirror text about element center is wrong

    Hmmm, quite an interesting observation. With text the justification point, I believe, is the "center" of the element. So, I would think that if you are mirroring text About Element Center it should be using this point. I have tested this in the major…

  • PROSTRUCTURE REBAR (COPY, MIRROR, ROTATE)

    Is there a way to Copy or Move more than (1) Rebar at a time? Is it possible to copy or move a group a Rebar? Is it possible to Array, Mirror or Rotate Rebar?

  • How to Create Battery Limit Symbol with Mirroring Capability in OpenPlant PID

    Applies To Product(s): OpenPlant PID Version(s): 08.11.11.43 Environment: Windows 7/8 (64 bit) Area: Customization Subarea: Original Author: Harpreet Singh, Bentley…

  • Reflection Depth in Mirrors

    Hello everyone I was wondering if anyone could help me figure out how to increase the 'reflection depth' in two mirrors facing each other i.e. how many times the image is reflected back and forth? I have spent the morning looking at the forums but to…

  • RE: Connect - Parametrics Mirror or rotated solid not retaining parametrics.

    In your case I found selecting the solid together with its center line used for dimensional constraints prior to mirroring, the variations will then work for both the original and mirrored solid.

  • Mirroring part of a cell

    MicroStation V8i (out of the box) I am creating a traffic sign (NO PARKING) cell. The sign includes an arrow pointing to the right, left or both. I would like to create one or two cells for this one sign. One cell that could change the arrow on the…

  • How can you change mirror settings for placing cell through keyin?

    Applies To Product(s): MicroStation Version(s): 08.11.09.459 Environment: Windows 7 32 bit,Windows 7 64 bit Area: Cells Subarea: General Original Author: Reginald Wallace…

  • Mirror command also rotates text

    This was placed in the Road and Site Design Forum, but was unanswered and probably fits better here. I'm trying to mirror individual station/offset callouts generated from InRoads per attached. It seems the text is being rotated 180 degrees simultaneously…

  • Mirror command also rotates text

    I'm trying to mirror individual station/offset callouts generated from InRoads per attached. It seems the text is being rotated 180 degrees simultaneously, though active angle is set to 0. Can't find any configuration variables or text attributes that…

  • Mirrored reference file problem

    Anonymous
    Anonymous
    We've got this problem in MSXM, as well as in MSv8i. Reference file B is attached and mirrored in master file A. Text and multilines look good. When saving master file A to DWG or DGN while merging all reference files, the text and multilines…
Communities
Support and Services
Training and Learning
Social Media