Browse By Tags

各位老师，我尝试使用如下代码在SheetModel中创建文字 设置的宽高为400mm，但是实际生成的宽高为4mm，该如何进行设置控制文字大小？ SheetModel和文字的属性如图 public void createtext() { DgnFile dgnFile = Session.Instance.GetActiveDgnFile();//获得定义文本元素的文件 DgnModel dgnModel = Session.Instance.GetActiveDgnModel…

各位老师： 图片中出现的错误，可能是什么原因引起的？

Place Surface Member By Boundary等设备基础防止功能无法启用。其他功能正常。已尝试修复安装还是无法启用。

Hi, Today I opened a file in which I have several sheets, but in the References window shows "Otientation not found" in the Orientation field for all of my references from the model, Yesterday was everything Ok.

how to creat an abnormal pipe like this? the central line has some slope. radius 1: 4000 mm; radius 2: 4420; length of the pipe :3000 ;unit: mm

我有一个自定义的流量开关组件，EC_CLASS为FLOW_SWITCH，在配置元件ISO图符号时，首先拷贝了GAUGE的符号，并把名字改为SWITCH，配置完之后，出ISO图，可以显示符号，但是圆圈中的文字却不显示，于是我在旁边放置一个GAUGE类仪表，发现GAUGE类仪表在ISO图中的符号自带文本，并且发现该文本就是用元件的Device_Type_Code和Number替换的。如何使SWITCH类的ISO图符号中的PI也能自动替换成流量开关的 Device_Type_Code和Number呢。请问这个文本自动替换的过程是如何实现的…

Hi, all We add a property in OpenPlant_3D schema letting Iso sheet name be a property of all components (see pic1), we also add it to Default Bill of Materials Labels(see pic 2). This property displayed normally in dgn files and manually published imodel…

It is quite hard to explain what happened, the pics and video can better show you the situation. At beginning, all the referenced model showing normally in the summarized model, once we turn on another referenced file, all the model became disorder(like…

It is quite hard to explain what happened, the pics and video can better show you the situation. At beginning, all the referenced model showing normally in the summarized model, once we turn on another referenced file, all the model became disorder(like…

We created an equipment in model A, and placed a series of nozzle on the equipment(also in model A), then we created model B, attach model A as reference, and try to build pipes based on nozzles in model A, but we cannot snap to nozzles, so the pipes…

In OPM CE, buttons in Component Gallery does not displayed completely, see following pictures: Does anyone has clue why this happen?

如图所示，CAD中效果，如何在OPM中设置得到

出现此类情况 同时，此种情况就算修改管道，仍然存在，甚至会变多

What we want is to dimension all valves from midpoint in isometric drawing. Now. both flange-end ball valve and welded three way ball valve are dimension from midpoint, but the dimension of flange-end three way ball valve is too detailed. Please see the…

Hello! What files should I transfer if I want to transfer the entire project with all the work (specifications, catalogs, worksets..)? Best Regards, Alex Bilanovsky

As you can see from the following pic, there is a grey shadow at the back of the pipeline number, how can I get rid of it?

Is there a config setting or raster manager setting to keep Openplant Rasters in place/visible when an alternate user within the company opens a shared file? How do we stop rasters from breaking and needing to be replaced with a new copy of the raster…

Dear All, I am encountering one proplem. I wanted to update or make changes of existing piping components came from vendor or consultant. For example, a valve or flowmeter. I first tried to drop the component to manipulate. But when I dopped it in OPM…

Good day I have been updating the tagging information for a new configuration but i am running into an issue where the tagging method i set up and the tags produced in the models are ending up different I am using the correct workset workspace when…

Hello everyone! Recently we are planning to replace our OpenPlant Modeler u8 with the latest version u10. However we noticed that the workset we used in u8, WorkSpace\OpenPlantMetric, was removed from the u10 install package. We have many important…