Browse By Tags

  • System Requirements: CPU, RAM and Graphic Cards

    Hi, I’m a PhD candidate at Federal University of Rio de Janeiro and we are planning to buy a workstation to work with PLAXIS 3D available in the university. However, I have some concerns about the system requirements. The recommended processor is a Quad…
  • RAM SS v17.04.01 Release Notes

    RAM Structural System CONNECT Edition Version 17.04.01 SES Release Notes Release Date: August 12, 2022 This document contains important information regarding changes to the RAM Structural System. It is important that all users are aware of these changes…
  • Direction of seismic load

    Hi My understanding is that RAM SS does not analyze load combinations, instead, individual load cases are analyzed and then combined. I am analyzing a nonsymmetric structure and I want to include seismic load in two opposite directions. I think Ram…
  • Custom built up shape RAM elements

    I have geometrical properties for a custom shape (C8x13.75 with 2-1/4"x8" plates on both top and bottom). I created a "Gen shape" in RAM Elements and assigned it to a beam that I am studying. RAM elements is able to analyze it, however, it is unable to…
  • RAM SS v17.04 Release Notes

    RAM Structural System CONNECT Edition Version 17.04 SES Release Notes - Updated July 18, 2022 Release Date: July 18, 2022 This document contains important information regarding changes to the RAM Structural System. It is important that all users are…
  • Exists Opposite Connection

    Applies To Product: RAM Connection Area: Design What does "Exists Opposite Connection" does? In Beam to Column Web (BCW) connections the “Exists opposite connection” check, is used assuming that exactly the same…
  • Regarding Lx parameter value.

    How to give the design parameter of Lx(lateral torsional buckling) For column member. In my case, The column height is 12m, Minor axis direction tied at each 3m. But major axis direction not tied. What is the Lx parameter value?
  • RAM

    Easily produce high quality and economical designs for all your structural projects using various concrete, steel, and joist building materials. Design, analyze, and create documentation with ease for your building projects, saving time and money.
  • RAM Elements existing PEMB analysis always fails

    We often need to analyze existing PEMB structures and when only existing loads are applied the structure still fails. We have used the MBMA special considerations option in our design and that does not seem to help. What are we missing? Is there another…
  • "external component has thrown an exception" ram concepts

    Hi all, will highly appreciate if someone'd be able to help me to resolve the following issue in ram concepts when importing a dwg? "external component has thrown an exception" Thanks and KR Abhay
  • Error in Leo file (unknow identifier "_Left run"

    Hi I got ram connection v12 but i got this issue with this leo file i try to reinstall it several times can you guys help me with this issue . Thank a lot
  • RAM Elements Update Design

    Applies To Product(s): RAM Elements Version(s): 16.05.00.213 or later Environment: N/A Area: Design Subarea: N/A Original Author: Bentley Technical Support Group …
  • Building Weight for seismic calculation in RAM

    I have a concrete building with roof at different level acting as a rigid diaphragm. I am getting less building weight (7000kips) in RAM frame compared (10000 kips) to vertical reaction summary for dead load in RAM concrete analysis. II have hand calculated…
  • COLUMN CAP CONNECTION DESIGN

    Moment at end of beam are 14132 Kip-in ( 1177 Kip-ft) when I design connection they moment considered are 1075.5 Kip-in (89.63 Kip-ft). why moment and forces are taken less then actual in Ram connection. Screenshot are attached.
  • RAM Elements v16 Update 6 (16.06.00.187) Timber Design

    In RAM Elements v16 Update 6 (16.06.00.187), how do I assign incising factor for NDS 2018 timber design?
  • RAM SBeam V7 - CBeam Design

    Hello, I did see a similar question being asked before regarding analysing C-beam from RAM SBeam but I don't have the option for that on my screen. For your info, I am using version 7.0 which should have the capability of design C-beams. How would…
  • RAM Elements English includes Spanish language pack?

    Hello, I downloaded and installed the English version of RAM Elements CONNECT Edition V16 Update 6, and I am wondering why it also installs the Spanish-Language Pack along with it? This language pack module does not appear in the Windows Programs list…
  • RAM Structural System - BRBF Baseplate Design

    Working on a steel project in which we're using CoreBrace BRBFs for a portion of our lateral system. We've gone through the first part of our lateral analysis and have received a table of values (including overstrength parameters) back from CoreBrace…
  • RAM Elements Tiltup - Bottom Panel

    Under geometry input, there is an option for "Bottom panel". I do not understand what this does. When a value is input, the graphic makes it look like the bottom of the panel is buried in the footing. I'm trying to figure out how to model the geometry…
  • Instabilities in Model (After Latest Update)

    Brought this issue up previously but wanted to see if anyone else is having the same issue. Figured it'd be worth posting on here just in case. We’ve had a few cases in our office with folks who have upgraded to the most recent RAM Elements version…
  • RAM SS v17.03.01 Release Notes

    RAM Structural System CONNECT Edition Version 17.03.01 SES Release Notes Release Date: March 18, 2022 This document contains important information regarding changes to the RAM Structural System. It is important that all users are aware of these…
  • Stress and Internal Force Contours grayed out in RAM Frame

    Hello! I'm working on analyzing a simple structure in RAM Frame. The structure consists of 4 concrete walls and two stories. The concrete material specified is supposed to mimic hempcrete. I have analyzed the structure in RAM Frame and the deflections…
  • 2022 Bentley Bash

    The 2022 Bentley Bash , hosted by the Southern California Bentley Users Group, is taking place on Friday, January 21 and Saturday, January 22. This is a free, virtual event. Classes include lectures and hands-on workshops, on Bentley software including…
  • RAM Concept Conflicting Audit Strip Results

    I have modeled a 1-way PT slab and beam system starting with RSS and importing into Concept. At the lowest level I have several columns that need to jog. The audits on the strips at those locations produce a couple sections with errors that suggest removing…
  • How to modify the memory settings in CUBE Analyst

    The amount of memory Analyst can use is by default 8 MB. This can be insufficient for larger problems, therefore users can specify the Memory settings if needed (e.g. 100 MB) by opening the Control Data File: Clicking on the "Memory" button and "Apply…