Browse By Tags

  • 安装SACS 二次开发Python包出错

    根据SACS软件中的Python文档——SACS Interop: Python API进行SACS包的安装,顺利安装 SACS-16.0-cp39-cp39-win_amd64.whl,后安装SACS-16.0.tar.gz时报错,安装情况见下图,请问如何解决
  • Does SACS handle breaking waves?

    SACS currently does not provide solution for breaking waves. However, Seastate and Wave Response program perform a check using DNV RP C205 (2014) - Section 3.4.6.1. Maximum Wave Height and Breaking Waves requirements. The maximum wave height (H b )…
  • Equivalent Statist Load Generation EQKLOD

    Hi, I am running a seismic analysis and am generating earthquake equivalent loads for pile foundation check. As per SACS-Dynamic Response manual, if we set “ Reversed Option ” on “ Both ”, SACS generates equivalent loads for 20 directions (every 18…
  • Pile fatigue

    Hello I am doing pile fatigue check based on pil.csf file (obtained from PSI analysis). Pile is defined as concentric tubular section so that grout is done in between the tubular. in FTOPT line grouted memeber option is selected and in FTOPT2 ,colum…
  • Pre-Services Analysis with Bentley SACS Connect Edition - Lifting, Loadout and Transportation

    SACS is an integrated finite element structural analysis package of applications that uniquely provides for the design of offshore structures, including oil and gas platforms, wind farms, and topsides of FPSOs and floating platforms. SACS software has…
  • psi input error - error system

    hi can you help with this error in static analysis with psi input thank you!
  • Installation of SACS Offshore Structure.

    Select the version number from the dropdown menu and press the “Download” link. NOTE: The SACS installer contains ALL available modules and features. These features are accessible through the Entitlement Service. All modules have a trial period of seven…
  • SACS 3D Results Viewer - Joint Displacement

    Hi, In SACS V16, it seems the joint displacement labeling results are only available for the maximum out of all the load case selected (active). Unlikely to the max member UC that can be displayed for each load case selected, separate runs with the…
  • SACS DATABASE - Blank ElementUC & JointCanSummayUC

    I want to table the result of member UC and Joint UC by using SACSDB and SQLite. but in DB schema, the ElementUC & JointCanSummayUC were Blank. as shown in the snapshot, do I have to set up something?
  • Load Condition OS01: PI is not defined."

    After running a static analysis (with PSI, Sacs & Seastate input files), at the moment to open the postvue database appears the following input error: Solution: This issue pass as a result in the configuration of the run file, to avoid this error…
  • Running Dynamic Analysis?

    Learn how to extract mode shapes of your offshore structure using Bentley SACS.
  • Introducing SACS CONNECT Edition V16.1 - SES

    The SACS team is pleased to announce the release of SACSCONNECT Edition 16.1 The SACS Version 16 installer can be downloaded from Software Downloads or the Fulfillment Center (a Bentley login is required). Full details on the changes made to SACS…
  • SACS-FAST 分析

    嗨 大家好 想请问在SACS中如何使用FAST作耦合分析,以及FAST是否能考虑紊流的影响。 在原本的FAST中,是可以使用turbsim来达到模拟紊流的效果,SACS是否支持turbsim? Best regards
  • Starting with Bentley SACS Connect Edition?

    Learn how to model a Jacket Type structure and start to get familiar with SACS modeling techniques.
  • New Video Published in Bentley Offshore YouTube Channel: MOSES Intro

    In this video you will be able to understand how to: Discuss the model hierarchy Discover the new features in MOSES Modeler v12 Model a weather station (diffraction geometry including ballast compartments)
  • Translate Load with Structure

    Dear Bentley Team, I am translating a structure vertically and horizontally and expect the applied load to get COPIED with the structure. I tried but it doesn't work. Refer screenshot below Is there any option to copy/translate load (node/member…
  • Offshore Structure under Fatigue Environment?

    Learn how to apply and analyze Spectral Wave Fatigue Analysis and Design of your jacket or topside structure using Bentley SACS Connect Edition.
  • SACS unity check weird value ?

    Hi, I have run my model and I am getting failures of some members. When I checked them, I found out the ratios below. Then I run it again because I thought something is wrong, but I get the same result. I always thought that the unity ratio is the…
  • 关于波浪、风力时程分析模块

    现在研究课题需要我做一个导管架在随机波浪载荷下结构动力响应分析,最终需要提取出上部组块所有节点的位移时程结果,目前找过能找到的中文英文的网站都没有关于波浪、风力时程分析模块的教程资料,询问一些工程师就说工程上一般不这样去考虑时域分析,我在DEMO和SAMPLE库里面自己研究了相关文件,通过random wave生成了随机波浪时程,也在波浪、风力时程分析模块计算了一遍,但是因为没有相关文件可以参考,并不知道结果对不对,而且也没有成功生成节点位移时程结果,不知道有没有老师可以帮忙解答一下?我的目标就是得到…
  • Combine the loads generated by weight definitions and the environmental loads in SACS

    Dear All, I am following the "Jacket Type Structure - Modeling Loads Using Weight Feature" tutorial from the "QuickStart for SACS Offshore Structure" Learning Path. In this tutorial, dead and live loads on the structure are defined by first defining…
  • PSI soil Ty, Qz and Py curves

    Hi, I have a Tz Qz and Py curves all in kN/cm. However, SACS ask for input data for Tz and Qz in kN/cm2. What should I do? should I divide Tz data by pile circumference and Qz by the corss-sectional area of the pile end? I would really appreciate if someone…
  • scatter diagram for fatigue analysis

    I have scatter diagram with total number of occurrences 175320 waves. It is indicated a note that these records are " Hourly event number of occurrence - reference period: 20 years". My question, what does this note mean? should we multiply the scatter…