Browse By Tags

  • Area of Steel Reqd. for Tran. Moment for Load Case ____ exceeds the Maximum Allowable for Element # ______ - STAAD.Pro Connect

    Good day. I was analyzing a model and designing the plates I made at STAAD.Pro Advanced Connect Edition 22.00.00.15. After the run analysis, the result gave the above notice on several plate elements I had. I modeled the plate elements using parametric…
  • ERROR: NO REFERENCE LOAD CASE OF TYPE MASS/GRIVITY/DEAD/LIVE IS DEFINED FOR MASS MODELING.

    I tried it quite times looking at responses here still I could not resolved it can any one help me with ? and check in the file as I shared it here. 5807.TK_STR.STD
  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • How to Model complex Concrete building projects ?

    What is the easiest and accurate way to modeling complex and huge Concrete building projects, Including irregular elements and the shear wall? Can I model staad building planner?