Browse By Tags

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
  • Von Mises correct?

    Hi I use STAAD Pro Connect V22 Update 3. Here I display a color plot of stresses in a plate between girders. I get Von Mises stresses more than twice as large as the Tresca stresses. How can this be? In theory Tresca shall be equal or larger than Von…
  • SIG Workshop: STAAD - Modeling and Understanding Rigid Diaphragms in STAAD.Pro

    SIG Workshop: STAAD - Modeling and Understanding Rigid Diaphragms in STAAD.Pro Date/Time: September 17, 2020 at 1:00 PM EDT Presenter: Sabrina Tedeschi, Senior Application Engineer, Bentley Systems, Inc. Register Now! This STAAD Special Interest…
  • Does STAAD consider 1% Seismic force for SDC A structure?

    for Seismic design category A structure, 10% of story dead load is required to consider (refer 11.7.2 of ASCE7-05). Does STAAD apply 1% of story dead load as Seismic load or it will calculate as per prescribed procedure based on chapter 12~15 of ASCE7…
  • SIG Virtual Workshop: STAAD: Using Tricks of the Trade in STAAD.Pro Editor

    Title: SIG VirtualWorkshop: STAAD: Using Tricks of the Trade in STAAD.Pro Editor Date/Time: 20 August 2020 01:00 P.M. EDT Presenter: Karimu Rashad, Senior Application Engineer, Structural, Bentley Systems, Inc. Register Now This STAAD Special…
  • Nodal Displacement and Member displacement and its allowable as per BS5950

    I have modelled one simple structure in STAAD PRO and found that there are two types of displacement value in post processing. NODE and MEMBER. Which displacement shall i use for comparing with allowable displacement as per BS5950 code.
  • SIG Virtual Workshop: STAAD for EMEA - Geometric Nonlinear Analysis Using STAAD.Pro Advanced

    Title: SIG Virtual Workshop: STAAD for EMEA - Geometric Nonlinear Analysis Using STAAD.Pro Advanced Presenter: Badreddine Ziane, Senior Manager – Application Engineering, Bentley Systems, Inc. Date/Time: May 28, 2020 11:00 AM CEST Register Now …
  • STAAD Webinar: Have no fear, Steel AND Concrete are here!

    It’s easier than ever before to take your project from analysis and design to automated drawing and documentation. Produce the bill of materials and gain instant insight into various design alternatives for the most cost-effective design. Please join…
  • SIG Workshop - Understanding and Customizing the RAM Connection Database in STAAD.Pro

    Join us on Thursday (4/23/2020, 1:00 pm Eastern) for a STAAD Special Interest Group virtual workshop. During this session, we will discuss the RAM Connection Database within STAAD.Pro and you will learn how to customize the databases for your company…
  • SIG Virtual Workshop: STAAD - Understanding and Customizing the RAM Connection Database in STAAD.Pro

    SIG Workshop: STAAD - Understanding and Customizing the RAM Connection Database in STAAD.Pro Host: Jessica Portuese Presenter: Sabrina Tedeschi, Application Engineer – Structural, Bentley Systems, Inc. Date/Time: April 23 2020 01:00 P.M. EDT Register…
  • SIG Virtual Workshop: RAM - Tilt-up Wall Design Using RAM Structural System

    RAM Special Interest Group: Tilt-up Wall Design Using RAM Structural System Host: Ann Marie Garko-Hill, Senior Manager, Bentley Systems, Inc. Date/Time: March 26, 2020 at 1:00 P.M. EDT Register Now This RAM Special Interest Group virtual workshop…
  • Using the PLAXIS Coupling Tool

    Application PLAXIS 3D Version PLAXIS 3D Date created 04 May 2017 Date modified 04 May 2017 This video explains how to use the PLAXIS Coupling tool to set up coupled soil-structure interaction analysis between…
  • Bentley Support Policy for Structural Products

    Support Policy for STAAD The Bentley Support Policy has been implemented to help organizations manage their use of Bentley applications, servers, services and license administration. The section below explains how the support policy applies to the…
  • Crashing of staad while using beta angle

    Staad crashes while assigning beta angle. Beta angles gets deleted after reopening the staad file.
  • Results Along Line

    After analysis i need to modify the geometry of one member. If i need this modification i will lose the cut lines created with results along line tool. I'd like to find a way to not lose the cutting lines after making the modify and relaunching the analysis…
  • SIG Workshop – Designing Concrete Structures using the STAAD Advanced Concrete Design Workflow (RCDC)

    Join us on Thursday (10/17/2019, 1:00 pm Eastern) for a STAAD.Pro Special Interest Group virtual workshop. During this session, we will discuss designing Concrete Structures using the STAAD Advanced Concrete Design Workflow (RCDC). This one-hour session…
  • STAAD pro

    When we use gust factor method and force coefficient method for any Structure as per IS 875 PART 3 ?
  • SIG Workshop - Designing Steel Structures for Deflection with STAAD.Pro CONNECT Edition (September 19, 2019)

    Join us on Thursday (9/19/2019, 1:00 pm Eastern) for a STAAD.Pro Special Interest Group virtual workshop. During this session, we will discuss Designing Steel Structures for Deflection in STAAD.Pro CONNECT Edition. This one-hour session is open to all…
  • SIG Virtual Workshop: STAAD for EMEA - August 22, 2019 - You're Invited!

    STAAD for EMEA Special Interest Group: STAAD.Pro Physical Modeler and Better Interoperability Host: Badreddine Ziane, Technical Manager, Bentley Systems, Inc. 22 August 2019 at 11:00 AM CEST Register Now The STAAD Special Interest Group for…
  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys
  • SIG Workshop: Software de Análisis Estructural – Julio

    SIG Workshop: Software de Análisis Estructural – Conexiones en STAAD.Pro anfitrión: Andrea Castelo Ingeniera de Aplicaciones Bentley Systems, Inc. 10 July 2019 11:00 A.M CDT (Mexico City) Regístrese Hoy Le invitamos al taller virtual de software…
  • SIG Workshop: Software de Análisis Estructural – 12 Junio 2019

    Software de Análisis Estructural SIG: Cargas de viento en STAAD.Pro anfitrión: Andrea Castelo, Ingeniera de Aplicaciones Bentley Systems, Inc. 12 June 2019 - 11:00 A.M CDT ( Ciudad de México ) Regístrese Ahora Le invitamos al taller virtual…
  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?
  • UC Ratio problem

    Actually i need all members UC Ratio values. How to get all values???? Please guys guide me New folder (2).rar