Browse By Tags

  • How to add bored cap to a SPEC

    How to add bored cap to a SPEC (Eg DN330XDN25 size) in Open Plant connect Edition. The problem is bored cap will have main port and run port as in case of reducer. A a drain line will connected to the run port of the cap. Normally it is placed in reducer…
  • What Piping codes are available for OPM

    Dear All, I am very new to this Bentley communities, and this would be my first question or rather questions. 1. What Piping codes are available for OPM , like the below link which is shown for AutoPipe. https://communities.bentley.com/products…
  • OpenPlant Administrator / Specification Generator

    Hello! I'm in trouble with OpenPlant Administrator. When I run it, I see that symbol of my project in projects tree is not yellow as others, but green. Then, when I run SpecGen, I get an error (see attachment and error log below). If I click "Continue…
  • What are important parameter For LapJoint Stub End to its creation in OpenPlant Modeler

    Hi, I am creating a record for LapJoint Stub end along with flange but anyhow graphics/created element is not forming in entered dimension. It seems that there is some relation/equation that overrides its creation. Parameter that I have included for…
  • Cam and Groove Coupling - OPM ver 8.11.11.304

    I have noticed that the couplings have been modified for the new version of OPM (08.11.11.304), as compared to the last one that I had been using (ver 08.11.09.568). The main problem is that the outside diameter that I enter ends up being the center…
  • Field Reference Description in OpenPlant Modeler

    Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: OpenPlant Specification Generator Subarea: - Original Author: Bentley…
  • Creating a Catalog from a Spec [TN]

    Applies To Product(s): SpecGen Version(s): 08.11.XX.XX Environment: N/A Area: N/A Subarea: N/A Original Author: Richard DeLong, Bentley Technical Support Group Overview At some point in time…
  • Specification Generator

    Key: CS – Client Server Article FAQ – Frequently Asked Questions TB – Technical Bulletin TN – TechNote VID – SELECTsupport Video Bentley AutoPLANT Specification Generator - SPECGEN The Spec Generator is a stand-alone…