Browse By Tags

I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

Is there any way to get Civil Accudraw to work in XSC mode? I have a few things that i miss from the old civil accudraw in Microstation, but that's another topic. The main thing is the locking from one view mode to another. I know ORD uses models in a…

If so, what is the syntax? I'm trying to get something like this to work: define_dgn "string1" \ dgn = C:\string1.dgn \ lvname = string1 define_dgn "string2" \ dgn = C:\string2.dgn \ lvname = string2 if x >0 then _s_string = "string1" …

I have been looking for this for a long time, and now it's time to ask the question to the people who might know the answer. I work with several seabed DTMs and often create profiles to view vertical shifts. Mostly I have one design survey with lots…

Hello, I have an existing alignment that I am using as a center line to cut my cross sections, and I have a second alignment (edge of road) that I need to show as a point on the cross section. I need to show the distance and elevation of the second…

Hello, need some help here. I have created a roadway off of a template and the existing surface/proposed horizontal and vertical curve. When I process it all, and click the toggle on for showing cut and fill values, it shows them in the cross section…

Any chance of adding Cross Section Navigator to future versions of Geopak Survey? We find that the surveyors would use this tool often if it was included in Survey.

When I try running the cross section labeling tool out of the Corridor Modeling window I get an error Run-time error '91': Object variable or With block variable not set I have the options to "End", "Debug", or "Help" "Debug" opens VBA…

Hi guys, I was working on my xin, trying to create a 11x17 section sheet in my cross section preferences, and now the axis text for my standard roll is about 200 times bigger than it should be. Using an old Xin I have been matching the setting and…

I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…

In version 08.09.01.45 Negative shoves all the annotation to the left of the initial point, Positive shoves it to the right, and Equal is supposed to array them out from the middle point. In 08.09.08.06 and 08.09.02.16 the "Equal" seems to be broken.…

Just curious, thanks in advance... Using MicroStation V8i SS3, V08.11.09.397. InRoads V8i SS2, V08.11.07.615. Multiple sections, files, and users experiencing the same issue. After creating a storm system SDB for a proposed drainage network, I'm…

Hi guys, Recently we came upon a problem where the contractor wanted us to report on changes in the elevation of the existing surface, areas where we had no determined points. The image below shows the OG and our Muskeg surface. The below…

When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…

I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…

I created a 3d element using "Solid by Extrusion Along" The element represents a pipe with thickness. I have the element displayed while creating cross sections but the element does not appear. I created a solid pipe and it does appear. …