Browse By Tags

Re: Inroads Update Cross Section Notes

Jason W. Smithey [Bentley Civil]

Ryan, Which specific notes are you updating in which this problem appears? I get the same behavior with both Single From Graphic and All. Thanks, Jason Smithey
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Re: InRoads. X-sections anotation problem

Jason W. Smithey [Bentley Civil]

Corey, The problems that I noted should only be in V8i. If you are having problems then you may want to contact support with your dataset. Also, it may not fix your collision free text problem but you should upgrade to version 08.09.03…
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
X-Ground lines above elevation limits

Mike

InRoadsXM V08.09.02.16 When Generating cross sections, the existing ground line always displays to the limits of the left and right axis . When this includes datum above the top elevation limit the line continues to display above the grid, over to…
- over 13 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Re: Inroads - Volumes from Custom X-sections

Jason W. Smithey [Bentley Civil]

End area volumes are not computed on skewed cross sections. Thanks, Jason Smithey
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Re: Custom Cross-Section Set

Jason W. Smithey [Bentley Civil]

On the General leaf, enter a number larger than the span of your alignment for the interval. I sometimes just enter 1,000,000. On the Controls> Critical Sections leaf, turn off all of the options that you do not want. See the help file for an explanation…
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Re: Inroads Update Cross Section Notes

Jason W. Smithey [Bentley Civil]

Ryan, I have reproduced your problem and filed D-37693. Thanks for reporting this. Jason Smithey
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
existing surface grade filtering slopes? Any ideas?

Thomas Moore

I am trying to find existing slope conditions along a 280 mile corridor. I need locations where a 5% and 3% slope exist within 100ft of the track CL (rail). Is there anyway that I can set up some type of filter that will highlight the area where these…
- over 12 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
InRoads XM 08.09.02.16 and 08.09.03.06 Annotate Cross sections, Balance pull down menu not working properly?

Jcunningham

In version 08.09.01.45 Negative shoves all the annotation to the left of the initial point, Positive shoves it to the right, and Equal is supposed to array them out from the middle point. In 08.09.08.06 and 08.09.02.16 the "Equal" seems to be broken.…
- over 11 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Re: Inroads XM: Cross section surface extends off the top of window

Jason W. Smithey [Bentley Civil]

Tim, Do you have 'Show Data Outside Elevation Range' toggled on the General leaf of the Create Cross Section dialog? If so, toggle that off. Thanks, Jason Smithey
- over 14 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum
Fill Slope Transitions / Parametric Constraints in the Roadway Designer

Matthew Neiman

Has anyone talked about the difference of modeling fills using a ration (e.g. 4:1) versus slope percentage (25%) particaularly regarding transitions? Example: A 2:1 slope transitioning to 4:1. One could expect the midpoint of this transition to be…
- over 12 years ago
- OpenRoads | OpenSite
- OpenRoads | OpenSite Forum