Browse By Tags

In order to get the final travel time and cost skims from an assigned network it is necessary to pass the loaded network back through the Highway program and build and skim the paths from the loaded network. This is done in the example below through…

If an input Turn Penalties file or an Intersection Data file is used in input for the Highway Assignment program, with the PENI keyword specifying the set used for each PATHLOAD statement, then it is possible to generate a turn penalty file with the output…

To extract the subarea junction file from the entire network junction file, you can use a few Voyager steps, as demonstrated in the attached example. ex_subarea_junctions_extr.zip The first step is dumping the subarea nodes into a DBF table. Note…

To obtain turn volumes from a Highway Assignment program, it is necessary to: 1. Include an output Turn Volumes file, for example with DBF extension: 2. Open the script file and specify the FORMAT of your output Turn Volumes file with the FORMAT…

Product(s): Voyager Version(s): 6.x Area: MATRIX/HIGHWAY Problem MATRIX and HIGHWAY programs in Voyager handle matrix files as one of the inputs to the program. These programs also provide the functionality to transpose a…

Product(s): CUBE Voyager Version(s): 6.1-6.4 Area: HIGHWAY Problem Highway assignment is an important step in the travel demand model process and also the most time consuming step in most models. Voyager HIGHWAY assignment…