Browse By Tags

  • OTD: IFC Import doesn't work

    Hello, I am fairly new to OpenTunnel Designer and have the following problem: 1 week ago I imported a IFC4.3 underground model created and exported in Leapfrog (same company - so it should be compatible). Everything worked. This week I created a…

  • What is the best method in a project to replace existing IFC models with an updated one ?

    What is the best method in a project to replace existing IFC models with an updated one ? while still keeping all the connected tasks and subdivisions intact ?

  • How to Edit the Solid properties in dgn format, if the solids are created in IFC file format.

    Applies To Product(s): OpenPlant Modeler CONNECT Edition Version(s): 10.09.00.74 Environment: Windows 8.1/10 (64-bit) Area: Solids Subarea: Edit material Original Author: Shubham Sawant,Bentley Product…

  • Warning: cannot subtract geometry by alternative tool

    In the Synchro model I imported an IFC file and when it was finished I got this error messenge: Warning: cannot subtract geometry by alternative tool [IfcMember_MV_Mootvoeg_Alveoliet-Neopreen_-_GMA2:MV_Mootvoeg-tanden_-_GMA2:8096331_(#2452115)_[MappedRepresentation…

  • IFCbeam import/export PLAXIS3D

    Good afternoon PLAXIS!!!!! I created i simple file IFC that i'd like to import in Plaxis3D. In particular, I created a beam with Rhino7 (ifcBeam). This is an 1-dimension beam (plate or anchor for Plaxis). I saved this file as IFC file(I try both…

  • 02-03.r: Import OpenBIM data exchange (IFC) information into AutoPIPE

    Applies To Product(s): AutoPIPE Version(s): ALL; Area: Import Date Logged & Current Version Dec. 2020 12.04.00.13 Problem: Can AutoPIPE import OpenBIM data exchange IFC Information? Solution: An IFC file…

  • Creating a model with IFC and point cloud import

    Application PLAXIS 3D Version PLAXIS 3D Date created 25 October 2018 Date modified 25 October 2018 This movie shows how to create a model by using the new point cloud import and IFC import tools, available since…

  • Revit model import + ifc importing

    We will shortly be reciving a revit model of a large housing complex from another firm of architects as we are now taking over the job for the detailing/production information stages. The model is simply the base model with no construction detail. We…

  • IFC Export

    Bezieht sich auf Produkt(e): OpenBuildings Speedikon Version(en): V8i + CONNECT Edition Produktbereich: Import/Export Produktunterbereich: IFC Ursprünglicher Autor: Johannes Lerch…

  • Exchange File Types -

    Hi i am about to import an IFC into Aecosim CONNECT and have noticed that there are two options in the Exchange File Types. Do these bring different results or is this an error?

  • IFC - Import (von REVIT zu AECOsim V8i (SELECT))

    Guten Tag, ich habe versucht einige Bauteilkombinationen von Revit zu AECOsim mit dem IFC - Format zu übertragen. Dies hat grundsätzlich mit den Geometrien gut funktioniert. Leider gibt es in der Weiterverarbeitung einige Probleme. Das Erste Problem…

  • RE: Unable to move elements imported from an IFC file to other levels

    Select an object in the model Right click and select Properties. In the Properties dialog go down to the Extended tab and change Locked to Unlock You can change the objects layer properties.

  • IFC import

    I'm importing a multi-storey structural model from IFC. On all storeys but one the imported file shows the holes in the slabs for stairs, lifts, risers etc but on one floor there only appears a solid slab (which is quite annoying when you are doing staricase…

  • RE: OPM Model to IFC

    Thanks Harpreet! Yes there is an existing enhancement to it. As IFC is different format, you may check it by opening with different applications and then exporting it to IFC. But Yes there is no direct import/Export right now. -Regards | Rahul …

  • RE: ISM - IFC and ProStructures

    I ran a couple of tests on your file, using the CONNECT edition Structural Synchronizer (planned for release first of October) and here are my observations. I also used MicroStation CE and Tekla BIMsight to check the core IFC data. 1. The big yellow…

  • RE: how i import IFC

    You can also import or export IFC files from the Structural Synchronizer. I replied to your other post assuming you are trying to export IFC from STAAD.pro.

  • Adding Revit ID as a Parameter in AECOsim

    I am Trying to import the Revit object ID from the exported IFC file into Bentley AECOsim. The revit ID is exported in the IFC file but AECOsim doesn't import it.

  • IFC import not maintaining forms and data

    I can open IFC models directly and all elements display as created, ie column is a column, slab is a slab and all properties are maintained. however if I import the ifc, all structural elements get converted to free forms and columns and beams lose…
Communities
Support and Services
Training and Learning
Social Media