Browse By Tags

RAM Concept - Dummy Walls Above Slab

Cody Lambert

I am using "dummy" wall elements above my PT podium slab to locate gravity-direction line loads on the wall element centerlines. I'm using this method for two reasons: 1) I have many zig-zagging 2x6 walls to deal with and it is easy to draw in the loads…
- over 2 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
How to activate a dynamic load

Micha van der Sloot

Application PLAXIS 2D Version PLAXIS 2D Date created 02 December 2019 Date modified 02 December 2019 General aspects In PLAXIS 2D and 3D, providing that the dynamic module is available, a dynamic (i.e., time…
- over 3 years ago
- GeoStudio | PLAXIS
- GeoStudio | PLAXIS Wiki
Load types

Micha van der Sloot

Application PLAXIS 3D Version PLAXIS 3D 2010.01 Date created 09 May 2011 Date modified 09 May 2011 All three load types of PLAXIS 3D, point load, line load and surface load, are explained and demonstrated in this…
- over 3 years ago
- GeoStudio | PLAXIS
- GeoStudio | PLAXIS Wiki
Point reference for load system and prescribed displacement not always correct

Micha van der Sloot

Application PLAXIS 2D Issue status Open First Affected Version PLAXIS 2D 2011.01 Found in Version PLAXIS 2D 2011.01 Fixed and Released in Version Issue # 17068 Date created 16 July 2012 Date modified…
- over 3 years ago
- GeoStudio | PLAXIS
- GeoStudio | PLAXIS Wiki
Deactivated loads are still visible in PLAXIS Output

Micha van der Sloot

Application PLAXIS 2D PLAXIS 3D Version PLAXIS 2D PLAXIS 3D Date created 22 January 2019 Date modified 22 January 2019 It is possible for projects to have various loads being deactivated in a calculation phase, effectively…
- over 3 years ago
- GeoStudio | PLAXIS
- GeoStudio | PLAXIS Wiki
Line load on slab edge or directly on slab

alireza ebrahimi

Hi Seth, Is it possible in Ram SS to apply line loads on slab edge in a concrete structures which does not have any beams? Or is it possible to apply line or point loads directly on concrete slab? when I apply line loads on slab edge I observe errors…
- over 4 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum
RE: Foundation Advanced - Linear Load

Sye

For Line Loads, please ensure that you generate the plate mesh after the line load is added. This would enable the software to align the plate nodes along the applied line load and it should accounted for. If you still face problems, please zip the model…
- over 6 years ago
- RAM | STAAD | ADINA
- RAM | STAAD Forum

Browse By Tags

RAM Concept - Dummy Walls Above Slab

How to activate a dynamic load

Load types

Point reference for load system and prescribed displacement not always correct

Deactivated loads are still visible in PLAXIS Output

Line load on slab edge or directly on slab

RE: Foundation Advanced - Linear Load