Browse By Tags

  • HEB STEEL BEAM WEB REINFORCEMENT

    Hello, As you can see in the image, the software gives me the possibility of applying steel reinforcements to the top and bottom flanges of the beam section, but I can't find an option to do the same with its web. Is it possible to do this? If so, how…

  • RM Bridge: Web & Flanges - Shear reinforcement

    The definition of the Web and Flange sections inside one Cross-section are done thru the Reference Set . For a Web definition the type Shear reinforcement for web shown the web direction (or median line) to be considered, so only one line (constituted…

  • RM Bridge: Bending, Cracking & Longitudinal Reinforcements

    Bending Reinforcement with Schedule Actions: UltSup or UltLc. A selection of elements for performing the ultimate capacity check can be done Structure > Elements > Checks. The following requirements already exist for performing these schedule actions…

  • 16. Concrete Structures - Ultimate Capacity Check

    Inside File\Examples\Demo Examples & FAQ user will find the Frequently Asked Questions and Solutions section for RM Bridge Enterprise . As shown in the screenshot below, user can select the T-beam model as a reference entitled Concrete Structures - Ultimate…

  • STAAD Foundation Advanced - Pedestal Reinforcement Ratio

    Hello, I am designing an isolated spread footing using ACI 318-05 with SFA Build 9.2.0.34. When designing the pedestal SFA provides an area steel of around 1% the gross area of the pedestal. However, ACI 318-05 Section 10.8.4 and 15.8.2.1 state a steel…

  • Is it possible to model randomly oriented, short, discrete fiber reinforced clay soil using Plaxis 2D?

    Hello All I am interested in developing a numerical model to show the behavior of a randomly oriented, discrete fiber-reinforced clay soil when subjected to loading. I have used Plaxis 2D for modeling geotextile reinforced retaining walls. Would…

  • Create rock bolts accurately in PLAXIS 3D

    Application PLAXIS 3D Version PLAXIS 3D 2013 Date created 17 February 2016 Date modified 17 February 2016 Note: Since PLAXIS 3D 2018, the introduction of the reinforcements/rockbolts in the Tunnel Designer (i.e.,…

  • How to model Rockbolts in the Tunnel Designer

    Application PLAXIS 2D Version PLAXIS 2D Date created 25 February 2016 Date modified 25 February 2016 In this movie we explain how to define rockbolts in the Tunnel Designer, available since PLAXIS 2D 2016. Note…

  • RAM Concept: Reinforcement grouping/scheduling

    RAM Concept CONNECT Edition v8 introduced grouping of parametric tendons and profile polylines. After trying it out, I was very impressed with this feature as it will help our engineering team reduce the amount of time we spend on designs while reducing…

  • Custom Shape Management for Reinforcement (NYSDOT)

    PDF I need to add custom reinforcement shapes to my model so they can be recognized in my bar schedule. I am currently running ACI (Imperial) Code but I need add additional rebar shapes for NYSDOT (see attached). How do I add these additional rebar…

  • RCDC FE Flat Slab

    Click on :- https://www.youtube.com/watch?v=yoM5tvYd9-s&list=PL5LpElzkNC9kImGGzzyWb8CGO27XwQmJT&index=5 This video features the design of Flat Slabs with defined Drop Panels and design strips: 1. Detailed explanation for Design and Detailing settings…

  • RCDC FE Design Settings

    Click on :- https://www.youtube.com/watch?v=uVIQgLb_Rgo&list=PL5LpElzkNC9kImGGzzyWb8CGO27XwQmJT&index=2 This video covers following Design and Detailing settings in RCDC FE: 1. General Design & Detailing Settings 2. Other Reinforcement & Anchorage…

  • Rebar drawing creation

    Hi, I am trying to create 2d rebar drawings from foundation model. ive created the 3d rebar model using pro concrete. What is the best what to quickly creat drawings from this? Many thanks Euan Rankin

  • [CONNECT]-Do I have to consider Bottom Reinforcement in uncracked (Class U) bonded tendons two way slab system in ACI318-11

    In Ram Concept (ACI318-11) Do I have to consider Bottom Reinforcement which comes out of (18.8.2,18.9.3.2) from Bottom Reinforcement Plan in uncracked (Class U) bonded tendons two-way slab system in ACI318-11, as according to my understanding to ACI318…

  • Incorrect Bar Spacing Displayed on Rule Set Design and Design Status Layers

    Applies To Product: Ram Concept First Affected Version: 7.00.00.12 Found in Version: 7.00.00.12 Released in Version: 7.01.00.06 Environment: N/A Area: Design Issue #:…

  • How can i reduce the tensile strength in flat slab by adding the reinforcement required in RAM CONCEPT

    Hello everyone, I use the Ram concept software to design the flat slabs by adding the PT required when the tensile strength exceeds the allowed value. However, recently, I found that it can be reduced by adding the reinforcement required. I can…

  • Rebar Export from Modules and ISM Sync

    RAM Elements has now the ability to export reinforcement bar designs for beams and columns. This feature allows to share concrete designs via Structural Synchronizer (ISM). 1. Example Model To show the process we will use the "Concrete.retx" example…

  • best software for reinforcement bar Bending schedule bars of bridge piers, deck slab and retaining walls

    I am working in a contractor company in Dubai.we are having project of bridge and retaining walls. i have to calculate reinforcement for bridge piers, deck slab and retaining walls and create bar bending schedule bars i am having 3d models of my bridge…

  • Stub-In with pad or repad cannot be processed in OPIM

    APM V8i SS8 08.1.13.245 OPIM 08.11.11.285 AutoCAD 2016 When a stub in with reinforcement pad is inserted on a pipe, OPIM cannot process the line. See attached image: I have already applied the solution found here: https://communities.bentley…

  • AUTOPIPE VESSEL - NOZZLE DESIGN- WELD SIZE

    In AutoPIPE Vessel nozzle design tab, how to edit the leg size of the weld on the outer side of the reinforcement pad(i.e. Weld Size-Outer nozzle weld)? The option, Weld Size-Outer nozzle weld, meant to enter this value is never editable. Request…

  • How to Report the Reinforcing Pad Using Schema Customization in OpenPlant Isometrics Manager

    Applies to Product(s): OpenPlant Isometrics Manager Version(s): 08.11.11.224 (SS6) Environment: Windows 7/8.1/10 (64-bit) Area: Settings/Attributes Subarea: Original Author: Swapnil Joshi, Bentley Product…

  • RAM Concept: Span Detailer Producing more Reinforcement

    Hi all, Just a quick question about the span detailing which I have never quite understood. Why is it that the design strips' span detailer produces more reinforcement? I understand that the overall quantity will increase, as the lengths of bars…

  • RE: rcc design error

    The lower columns in your model does seem to have higher compression than upper columns but the moments are higher in the upper columns. For example for your load combination 3, if you look at the My and Mz moment values for members 8 and 34, you will…

  • Adding Rebar to Referenced MicroStation Solid Objects

    Product(s): ProConcrete Version(s): Power or MicroStation Versions Environment: N/A Area: N/A Subarea: N/A Overview This is a short video on working with MicroStation solid objects that have…

  • RAM Concrete Shear Wall Negative Reinforcement Ratio

    Applies To Product: RAM Concrete First Affected Version: Found in Version: 15.03.00 Fixed and Released in Version: 15.04.00 Area: Design Issue #: 651534 Problem Description…
Communities
Support and Services
Training and Learning
Social Media