Browse By Tags

  • Plaxis 3D Tunnel Designer design trajectory in all three dimensions

    Hello together, I would like to define the position of my tunnel in x,y and z direction, i.e. site plan and elevation plan. So far I have defined the course of the tunnel in the x-y plane (see photo). Now the first three segments have a constant inclination…

  • Create 3D By Slope To Target Leaves Huge Gaps Where It Transitions From Cut To Fill

    Hi There, Does anyone know if there is a fix for the tool "Create 3D By Slope To Target" which will prevent it from leaving Huge Gaps Where It Transitions From Cut To Fill. Something similar to "Use Feature Name Override" for templates? The tool is…

  • Entry Exit Search in PLAXIS LE

    Hi guys, Im looking at the Plaxis LE documentation and am having trouble performing EntryExitSearch analyses on the API. Can you give me an example, please? Thanks, Mariele

  • PLAXIS LE DEFAULT COLOR OF SLOPE

    Hello guys, How do I change the default color of my talude in the api of plaxis LE? Thank you very much for the attention.

  • GeoStudio

    GeoStudio is an integrated software suite for solving slope stability, groundwater flow, and environmental challenges using SLOPE/W, SEEP/W (& SEEP3D), SIGMA/W, QUAKE/W, TEMP/W (& TEMP3D), AIR/W (& AIR3D), CTRAN/W (& CTRAN3D) and BUILD3D. This GeoStudio…

  • Modelling help

    Hi everyone. I am trying to model how a load evolves on a slope (glacial load), the way to model it can be as a condition of hydrostatic stress with dynamic evolution (from 1 to 0 in the multiplier) or as an elastic material decreasing the height of…

  • Widen to match existing surface slope - ORD

    Hi Everyone, What's the easiest way on ORD to widen the road pavement to match existing road surface slope? I want to project the slope between ex road centreline and ex edge of pavement to the profile of the lip of kerb along the new (widened) edge…

  • How to Avoid Rolling offset Dimensions in Isometric for Deviated Pipelines

    Applies To Product(s): OpenPlant Isometrics Manager CONNECT Edition Version(s): 10.07.XX.XXX & Above Environment Windows 7/8.1/10 (64 bit) Area Settings/ Attributes Subarea Settings and Attribute Original…

  • E' and c'/Su increase with depth (not level) in a Plaxis 3D model with varying ground surface (slope)

    Dear All, I have a Plaxis 3D model in which the ground surface is a slope replicating the real topography (modelled using point cloud). Is there a way to assign E' and c'/Su increase with depth (not with level) in the Plaxis 3D model? Assigning E' and…

  • Vertical Grade Annotation in Plan

    I have been trying to annotate the ahead grade and back grade of my profile alignment PVI along my horizontal alignment. However, the grades that are shown are not correct. I do not know where the grades are being read from. Does anyone know why the grades…

  • Apply 3D by Slope to Target

    The Apply 3D by Slope to Target from the 3D Geometry Tab in the Civil Ribbon Tab is very useful to adjust Terrain models near the bridge abutments . Users can rearrange the terrain slope to match a reference and create models adjusted to reality. Basically…

  • Pipe slope - Is modelling it necessary

    Say a pipe is to be sloped at 1:100 fall in physical terms. My question is should we model the pipe slope in AutoPIPE? I see some companies neglect the effect of slope claiming it to be negligible and others include the slope in the model. I'd imagine…

  • I get 'Link slope is nearly zero.' error in my sewercad project.

    I get 'Link slope is nearly zero.' error in my sewercad project. We write invert like (818m elevation -> 20m) , (817 m elevation-> 19 m) How can we correct it ?

  • 26. How to display slope dimensions or slope symbol on stress isometric using AutoPIPE ?

    Applies To Product(s): AutoPIPE Version(s): ALL; Area: Settings Date Logged & Current Version April. 2021 12.05.00.16 Problem: How to control what is displayed on Stress isometric drawing, slope dimensions or…

  • How to Apply Slope on Straight Pipeline Along with Inline Components on it in OpenPlant Modeler CONNECT Edition

    Applies To Product(s): OpenPlant Modeler Version(s): CONNECT Edition Update 8 (10.08.00.51) Environment: Windows 10 (64-bit) Area: Customization Subarea: N/A Original Author: Harshavardhan K, Bentley…

  • pendiente(slope)

    buenas noches, quisiera que me aclaren lo siguiente, que implicancias tiene en el diseño hidraulico (gvf-convex) activar use 3D lenght? ya que al diseñar con la opcion activa, me di cuenta que el slope calculado esta dada por la diferencia entre cotas…

  • Annotating Cross section slopes in OpenRoads Designer (Version 10.08.01.33)

    I am trying to annotate cross slopes of my cross section in OpenRoads Designer. In Annotation Group Manager, the only way I could get cross slope labels to show is to filter segments by point Names and not point Feature Definitions. Even with point names…

  • Center-to-center vs wall-to-wall length and slope calculations

    Product(s): StormCAD, SewerCAD, SewerGEMS, CivilStorm Version(s): V8i, CONNECT Edition Area: Calculations Problem Are pipe lengths and slopes based on the center-to-center distance between the structures, or based on edge…

  • Label Slope with whole Numbers

    Please add a formatting option to Label slopes such as 2:3 or 3:2 as that instead of 1:1.5.

  • Limiting slope on through lane while curb profile is variable

    I can't help but feel there is a simple solution for this but here I am, in need of the great wisdom of the community here. I'm trying to get my road shoulder slope to vary while the slope from my centerline to the edge of travel lane fixed at 2%, while…

  • Slope Calculated is different than actual slope, which in return change invert level at downstream.

    In SewerGems, I am encountering a problem when designing storm drainage network. The calculated slope I got after running design option in base calculation option using GVF-Rational Storm Cad, is changed as what it should be according to velocity and…

  • What does the user notification "Conduit has adverse slope" mean in the storm and sewer products

    Product(s): StormCAD, SewerGEMS, CivilStorm, SewerCAD Version(s): 10.XX.XX.XX, 08.11.XX.XX Area: Calculations Problem What do the user notifications "Conduit has adverse slope" or "Link slope is zero" mean? Solution The…

  • RAM Gable Roof Modeling

    I am trying to model a gable roof. I understand that this needs to be accomplished by adjusting the heights of the ridge beam but am having trouble defining two separate slab polygons. I am able to successfully model one half of the gable roof and have…

  • How are the profile descriptions derived in SewerCAD's GVF-Convex solver or StormCAD's GVF-Rational solver?

    Applies To Product(s): SewerCAD, SewerGEMS, StormCAD, CivilStorm Version(s): CONNECT Edition, V8i Area: Output and Reporting Original Author: Scott Kampa, Bentley Technical Support Group Problem…

  • [Openroads] Draw slope direction pattern/hatchures

    Add ability to draw slope indicators snapped(accurate) from top to toe and also correctly handle more complex patterns without slope indicators overlap.
Communities
Support and Services
Training and Learning
Social Media