Browse By Tags

  • SS3 Superelevation Set up in Geopak

    Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Superelevation Original Author: Nico Roman, Bentley Technical Support Group Settings: Config variable for sep and srl files : Civil_superelevation_rules_directory…
  • Corridor Clipping in PowerCivil ss3

    Is it possible to get corridors containing closed components (Tunnel Sections) to cut against each others smoothly? I have tried to use "Add Clipping Reference" under Corridor Meny, but the result is a 2D, from above, projected cut. The cut is vertically…
  • GEOPAK SS3 Model - Feature Definition drawing on Default level

    When Corridor Modeling and showing cross-sections I was having the issue of a certain surface feature always drawing on the active level rather than the level that it was supposed to as defined by an Element Template. This is supposedly happening because…
  • GEOPAK SS3 - XS Sheet Label Symbology

    I am trying to use GEOPAK SS3 for a production plan and here is my latest issue. I cut XS cells successfully in SS3. I then used GEOPAK SS2s cross-section sheeting tool while in the same MS session launched with "Load_GEOPAK_SS3=1" used. Nearly every…
  • SS3 - Cross Sections doubts, concerns and problems

    Hi, With OpenRoads Technology I saved a lot of time on 3D modeling stage of my project. Unfortunatelly, now I have to payback this saved time twice when annotating cross-sections. Since I am stuck with cross-sections I hope someone here would be able…
  • SS3 Profile Associations / Dependencies

    Using OpenRoads, it's easy to find out which element a given element is dependent on horizontally - and to change that reference association to a different element if necessary. How do you do the same for vertical geometry? For example, if I select…
  • SS3 - Bottom Mesh from Surface Template

    I'm working on a site model for an outdoor track and field complex. So far, I've completed my horizontal and vertical geometry, created terrain objects (one for the track, another for the sidewalk, a third for the infield, and a fourth for the outfield…
  • SS3 - feature definition back to XIN file

    Hello, I am in the middle of project with InRoads SS3 implemented. For some reason I have to complete the project with SS2 release. I left my xin behind when moved to SS3 on previous project and created rich dgnlibs with element templates and feature…
  • Call OpenRoads function (InRoads SELECTseries 3) under started MicroStation

    Any idea to call OpenRoads functions under started MicroStation? Load_InRoads_SS3 = 1 variable is added into CFG file. InRoads Ss3 Explorer can be started under started MicroStation However, the OpenRoads functions, such as Terrain, Survey...and…
  • SS3 Existing ground missing in cross section view

    I am in my model design and have a cross section view. I have lost my existing ground line. Proposed is shown. I have set my active terrain to my existing and I have the existing boundary referenced. Any ideas why I can noe see my existing…
  • Creating Terrain Model from Corridor Element and Complex Terrains

    All, I followed the steps in this video ( http://www.youtube.com/watch?v=8UON7jngtRU ) to create a terrain model from a corridor. However, the terrain model that was generated does not follow the surface of the corridor (see screenshot below - the…
  • SS2 and SS3 DTM Visibility Tools - Drape on TIN - Offset Height

    I am using a tool called "Visibility Tools" Found under DTM==>Analysis==>Visibility I have found that the "Offset Height" under "Drape on TIN" does not work in SS2 or SS3. The tool does work in V8 Philip Mashuda
  • Cross section labeling - Geopak SS3

    I need guideance on cross section labeling. I have an “X” that shows on my Geopak SS3 cross sections. When I annotate the sections, I do not want to annotate slope to that point. How do I remove the “x” and not annotate the slope? Where is…
  • Power InRoads SS3 Recommended system requirements

    We have noticed that with the added features in InRoads SS3 it requires more of our Workstations. We have several that are at due to be replaced. What is the recommended hardware to run InRoads SS3? Processor: Memory: Video Card: Also as…
  • GEOPAK SS3 - XS Labeling/Annotation?

    I am looking for a good "help document" that explains what is necessary for and the steps to take in order to label cross sections created by GEOPAK SS3. The cross-section labeler that I just became familiar with in SS2's Roadway Designer is gone, and…
  • Re: MX Road SS3 Display colours

    Can you check that the MicroStation Setting as set as below for your project. If they are set differently can you change them and when you load into the project create a new plan display and load an MX model to check if it displays correctly. …
  • Using GEOPAK SS2 equivalent tools in GEOPAK SS3?

    I started a new thread with a new Subject in order to appeal to a larger audience... I am trying to work my way through an entire production design/plan preparation sequence using GEOPAK SS3 and am running into a few stumbling blocks. I realize that…