Browse By Tags

  • Showing warning for tapered section design

    ***WARNING : MEMBER - 4 IS SLENDER AND CANNOT BE CHECKED FOR MOMENT FORCES. IF THERE IS ANY BENDING, THEN BE AWARE THAT THERE IS NO CAPACITY FOR THOSE FORCES. ONLY WIDE FLANGE SHAPES WITH SLENDER WEBS CAN BE CHECKED FOR BENDING. Why I get this warning…

  • "DEFINE" COMMANDS FOR LOAD GENERATION SHOULD BE PROVIDED BEFORE SPECIFYING PRIMARY LOAD CASES.

    Tell me how can I get rif of this error please. DEFINE UBC ACCIDENTAL LOAD ZONE 0.4 I 1 RWX 3.5 RWZ 3.5 STYP 4 CT 0.0488 NA 1.2 NV 1.6 SELFWEIGHT 1.1 UNIT METER KN DEFINE WIND LOAD TYPE 1 WIND_PEDESTRIANBRIDGE <! STAAD PRO GENERATED DATA DO NOT MODIFY…

  • Section Wizard Import Error

    Hello, I have created a built-up section in section wizard and am trying to import it into my STAAD model. When I try to add my .upt file I receive this pop up: The file I am trying to use does not contain any "-" nor any other special characters…

  • Seismic Load Generation on Disjointed Structures

    Hello, I would just like to clarify if the issue stated in this help forum is updated. Analyzing multiple disjointed structures in one model Has this issue been addressed in STAAD Connect Edition? If yes, which update version has it. If not, are…

  • USER TABLE I SECTIONS NOT ANALYSED SHOWING NAN(IND) ERROR

    WHILE WORKING WITH USER TABLE PROPERTIES FOR STEEL SECTIONS- I SECTION HAVING MORE USAGE TO CREATE TAPERS SECTIONS WITH DEFINED NAMES, PREVIOUS VERSIONS, AUTOMATICALLYCALCULATE THE IX, AY AND AZ, IN LATEST UPDATE, PROGRAM ASKING TO ENTER IX, AY AND AZ…

  • Create Tab is Disabled

    Applies To Product(s): STAAD.Pro Version(s): ALL Environment: ALL Area: General Solutions Subarea: General Information Original Author: Abhisek Mandal, Bentley Technical…

  • Instability Joint

    1. Staad_19-01-2023 .std I am not sure what is causing this instability and how to fix this issue. Any advice, suggestions would be appreciated! I have attached the staad model to view. Thank you. 1. Instability at joint 447 2. ***WARNING - DIAGONAL…

  • STAAD.Pro CONNECT Edition Installation

    Applies To Product(s): STAAD.Pro Version(s): CONNECT Edition Environment: Area: STAAD.Pro Download/Installation/Security/Performance Subarea: Installation Original Author…

  • related to member fail in response spectrum analysis

    staad file with EQ analysis.rar I am designing a G+2 building but am unable to remove warnings. you can see the file I attached. if I am wrong please try to provide the sample file of response spectrum analysis file for reference.

  • IS800 2007 WSD syntax

    The correct systax for using design code IS;800 2007 section 11 ( WSD ) is CODE IS800 WSD If someone types IS800 2007 WSD , STAAD still runs the file but actual design is performed as per IS:800 1984 i,e, same as using syntax CODE INDIAN This bug…

  • create new physical model option disabled on STAAD,Pro CONNECT EDITION homepage

    Hi Everyone, When I open my STAADPRO CONNECT EDITION latest version (August 2022) the option of create new physical model is disabled on the homepage. Can someone please provide a solution for this? The option for creation of new Analytical model and…

  • Section Properties Not displaying in Report In Stadd Connect

    Hello Everyone ! I Have Done Analysis For Window Model Using Prismatic General Section. But While Generating Report , No Property Values i.e. Ixx, Iyy, Izz For Prismatic Section Were Displayed in Utilization Ratio Table. Please Suggest How to get…

  • Unable to Install STAAD.Pro onto a prior and existing version

    Applies To Product(s): STAAD.Pro Version(s): ALL Environment: ALL Area: STAAD.Pro Download/Installation/Security/Performance Subarea: Installation Original Author: Global…

  • WARNING: DESIGN OF SECTION FOR MEMBER # FOR PLATE SECTION

    Hello, I came across with an issue, could you please help me. I need to use plate member for stair stringer, Staad is showing errors for the analysis of the member. WARNING: DESIGN OF SECTION FOR MEMBER # Please help me how to rectify the…

  • How to reset the colors in diagrams?

    Applies To Product(s): STAAD.Pro Version(s): All Environment: N/A Area: Post processing Subarea: Original Author: Abhisek Mandal Bentley Technical Support Group …

  • DESIGN NOT PERFORMED WITH PRISMATIC PROPERTIES, USER-TABLE MAY BE USED TO DESIGN PRISMATIC SECTIONS

    Hi, I have created a section with section wizard by using plate elements in section builder as attached. i have exported to staad.pro with Prismatic option. Its not getting design with the Euro code and it showing the warning message as * DESIGN NOT…

  • How to identify the type of chord branches truss connection?

    ​ Applies To Product(s): STAAD.Pro Version(s): ALL Environment: ALL Area: STAAD.Pro Support Solutions Subarea: Connection Design workflow Original…

  • in plane Shear force in wall

    I model the wall in staad pro. & want to design the member manual, how to obtain shear force & bending moment from model

  • Error in Moving load generation

    I have attached my STAAD 3D model with a moving load generator which when run is giving me an warning message. The warning message reads "No Members in specified Vertical Range". The moving load is being applied to level and straight beams. Top Module…

  • Floor Load Distribution

    Is there a way of telling the floor load distribution to ignore certain beams? I have a floor with plan bracing. I don't want the bracing to attract any load. I can specify the bracing members to not attract load? Cheers, ASN STAAD Pro Connect…

  • How to remove all materials from model

    Hello, I have recently imported a SACS file into STAAD. The materials have been brought in but there a literally hundreds of different materials. How do I remove all materials and start afresh? Software: STAAD Pro Connect Edition V22 Update 7…

  • How to get the time vs acceleration values from dynamic analysis using OpenStaad in Staadpro connect?

    I am trying to get the time vs acceleration values from the results in dynamic analysis in Staadpro using OpenStaad. I had come across a person asking the same question in 2013 and it seems that there was no function back then that could access these…

  • SLAB LOAD COMBINATIONS ARE NOT LOADED IN RCDC

    Hello, I have modeled a wall that rests on a slab on four beams and when going to the RCDC I do not see the option of being able to load the slab with the load combination created in STAAD, which is, by the way: All I see in RCDC is this: Instead, as…

  • UNABLE TO READ ANALYSIS DATA - RCDC

    Hi, I am having a problem wanting to run the RCDC for a concrete retaining wall. When I want to run the software, the poster shown below appears: Attached file below: Muro de contención.STD Thanks in advance, Ignacio

  • ISM is missing in the STAAD pro Physical Modeler

    Hello everyone Q1/ I am using the Staad Pro CE 22 update 7, the ISM is working fine in the analytical model but it is missed in the physical modeler, there is only iTwin service and does not work for me, as shown in the screen. After clicking it…
Communities
Support and Services
Training and Learning
Social Media