Browse By Tags

  • STAAD Foundations Punching Shear Dcritical value incorrect

    Hello, I have exported the load cases from a STAAD model to a foundation model, and I have begun the design for pile caps. However, I am getting strange values for Dcritical. I have a 48" thick pile cap, and the effective depth calculation reads as follows…

  • Design of Solid slab (Conventional slabs)

    Hello Everyone For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…

  • Dummy beam

    Hello Everyone. I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?

  • Nodal Displacement and Member displacement and its allowable as per BS5950

    I have modelled one simple structure in STAAD PRO and found that there are two types of displacement value in post processing. NODE and MEMBER. Which displacement shall i use for comparing with allowable displacement as per BS5950 code.

  • UC Ratio problem

    warehouse.zip wind calculation also in that folder.... try to fix this probem guys

  • PUNCHING SHEAR CALCULATION IS MISSING

    PUNCHING SHEAR CHECK CALCULATION IS NOT GENERATED(MISSING0 WHILE DESINGING IN STAAD FOUNDATION FOR A PARTICULAR STAAD MODEL, INSERTING THE MODEL FOR THE QUIKEST POSSIBLE SOLUTION. KINDLY REVERT AS SOON AS POSSIBLE L-Shaped_combined_Final.sfa

  • how to get the loadings details in report????

    I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

  • (04.30.2013) Bentley - Structural eSeminar: Steel, Concrete, and Rebar Modeling and Detailing Attendee Questions

    Applies To Product(s): Bentley Structural eSeminar Version(s): All Environment: N/A Area: Q & A Subarea: N/A Original Author: Bentley Technical Support Group …

  • neues Projekt anlegen

    Wie kannich in Bentley Architecture, Bentley Building Mechanical Systems, Bentley Building Electrical Systems oder im Structural Modeler ein neues Projekt anlegen? Worauf ist zu achten und warum sollte ich es nicht über den MicroStation-Manager anlegen…

  • Unterschiede Modeler - Dashboard - Synchronizer

    Was ist was? - Bentley Structural Bezeichnung für Structural bis inklusive Version XM - Structural Modeler Bezeichnung für Structural ab V8i - Structural Dashboard kleines Tool, was die Version prüft, ob sie aktuell ist. (Verwaltet die Produkte…

  • Bentley Structural / Structural Modeler

    Inhalte: neues Projekt anlegen Unterschiede Modeler - Dashboard - Synchronizer

  • Bentley Building Mechanical Systems

    Inhalte: Eigene Instance Data erstellen Floor Manager - Eigene Ebene anlegen Floor Selector - ACS Sperre aufheben Change working units to HVAC Elemente koennen nicht mehr platziert werden neues Projekt…

  • Bentley Architecture

    Inhalte: Architecture Rollendatei arch_roles.cfg nicht gefunden Bentley Architecture Zeichnung als MicroStation dgn Datei speichern und bearbeiten DataGroups und dazugehoerige Annotation Cells DataGroup-Stempel erzeugen Fenster in einer Decke…

  • RAM SS

    Using Verify Tool while importing RAM Slabs assigned using "Whole Floor" mode not imported Considerations for Utilizing the Export and Import Functionality Between Stuctural Modeler and RAM SS

  • How To Export A Bar Joist

    How To Export A BarJoist To ISM Background Two (2) forms of a BarJoist are created by Structural Modeler and PowerStructural Modeler. The first form comes from the BarJoist Utility. Barjoist objects created with this tool can be created parametrically…

  • Adding DataGroup Data Programmatically

    Tank Editor Application This application is provided as-is and is provided to serve as a programming example only. The "Tank Editor" will allow you to specify the height, diameter and thickness of the tank. It will create a circular solid, smooth…

  • Showing RAM Concept Reinforcing In Structural DocumentationCenter TN

    Showing RAM Concept Reinforcing in Structural DocumentationCenter Solutions discussed: Documentation of concrete buildings Products discussed: RAM Concept V8i, SELECTseries 4 (r3.4), Structural DocumentationCenter V8i You have just completed…

  • autocad to Miscostation export

    Greetings, Am about to work on Corp of Engineers project and they spec that output is to be in Microstation format. Am using Prosteel by Bentley in Autocad 2010. I am aware that Autocad has an export function to prpoduce .dgn files. My questions are…

  • Structural Modeler to ProSteel (importing to prosteel)

    Hello Everyone, I am looking for a way to get Structural Modeler files in to ProSteel. If anybody can give some direction on this it would be greatly a ppreciated . Thanks, Gabe Scherer ProSteel V8i SELECTseries 4 for MicroStation 0…

  • Automatic dimensioning: how to?

    Hi everyone, I finally have some time to figure out how bentley structural works. At the moment i'm trying to get automatic dimensioning to work, but i'm stuck... for now i can get the labels and centerlines to work. Can somebody give me a…

  • Job opportunities in Qatar for engineers

    A prestigious public company in Qatar is hiring engineers : They urgently require the following professionals- MINIMUM 7 YEARS EXPERIENCE DESIGN DRAINAGE Foul Sewer Engineer Hydrologist Senior Planning Engineer Senior…

  • Using Verify Tool while importing

    The "Verify" tool allows the Bentley Structure (BStr ) to check if any "unknown" section is getting imported to BStr while importing from RAMSS or STAAD.Pro. BStr sets default sections for all unknown sections detected in the model being imported .The…

  • Beta 2 - AECOsim Building Designer V8i (SELECTseries 3) Technology Preview

    I am pleased to announce that we have posted AECOsim Building Designer V8i (SELECTseries 3) Technology Preview (Beta 2) (v08.11.09.147) to SELECTservices: Downloads/My SELECT CD . This release can be found on SELECTservices by setting the Product “AECOsim…

  • Structural Modeler Version warning

    How can we permanently get rid of this message that keeps coming up when opening up a drawing that was done in a previous version, when opening it up in the latest version? The message will pop up again next time you open the same drawing even though…

  • Gravity tilt & Load factor in Staad offshore

    Dear friends In Staad offshore we have option to include gravity load effect by clicking Gravity tilt. My question is can we able to consider Gravity tilt for few load case included and few load cases excluding gravity tilt. when i tried its either…
Communities
Support and Services
Training and Learning
Social Media