Browse By Tags

  • Editing in Station Offset Reports

    Hi all, I have a corridor of 4 Lane divided carriageway and I need to create a lane slopes report @ 10m interval. I ran the station base report . The camber/Lane slope in reports is calculating from centerline "CL" to carriageway edge "EOP" which is…
  • End Condition Exceptions - Component Templates

    If you watch the Modeling Multiple Corridors in Roadway Designer video located here: It shows how to place end condition exceptions and to place new end conditions from a template. I created one with components and an end condition, like I thought was…
  • Roadway Template "Not in Library" ?

    New user here, InRoads V8i SS2. I have a Template Drop showing up blue and help states this is because the template is not in the library. The stations seem to be working fine, but is there a way to save this working template in the Roadway Designer back…
  • template

    hi every one, i am using power rail track when i run my earthwork template using express modeller a note book window open with using of failed end conditions in template but its does create earth work but use the same template in roadway modeller…
  • Create Templates from DTM in InRoads

    I apologize ahead of time for my poor description of what I am about to ask... Is there a way in InRoads to take an exsisting DTM surface and create a template from it? We have a ditch running paralell to our road and are needing survey layout at 50…
  • Superelevation on Ramp

    Running InRoads V8i - When running the PGL along either edge of a single lane ramp, what is the best method for creating superelevation? The wizard requires three points and to specify two or four lanes. If I simply create control lines for the left and…
  • Re: Import/Export Parametric Constraints

    Hi Chuck, This is planned to be fixed in the SELECT Update for InRoads Group V8i. Reference D-33623. Thanks for reporting this. Jason Smithey
  • Overlay/Stripping Feature in Roadway Designer/Create Template

    Hi guys, I have currently moved across from XM to V8i SS1, and I remember seeing this Overlay/Stripping feature in a Seminar early this year. But, I am a little unsure of its possibilities and how to actually utilise it? Any help would be vastly appreciated…
  • Re: Vertical Gore Tool

    Michael, Please contact our technical support group through the following mechanism and provide them with a copy of your dataset. http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey
  • Cross Section: proposed surface/end condition doesn't intercept existing ground

    I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…
  • Re: Test Template Suggestion

    Please file all change requests through the following mechanism: http://appsnet.bentley.com/srmanager/addcall.aspx Thanks, Jason Smithey