+++under construction+++
Product Version
Product
Bentley AutoPIPE CONNECT Version v12.08.04.009 LanguageEnglish
Date PostedEnglish - December 2022
PlatformsMicrosoft Windows 8 Professional or higher
Microsoft Windows 8.1 Professional or higher...
Back in the day of MX, before corridor modelling, when an earthworks slope was cut and it flipped from cut to fill the earthworks would reduce in size to the point at which it flipped i.e. the line touched the reference line, and then go back out again...
Read more.Hai SACS users,
I got this warning after running the analysis *** WARNING - LOAD LABEL CS01 HAS LOAD ID LOAD NO FOUND. What does it mean?
Regards
Hi Fathi,
Thank you for the files. I have look into it and found that you have defined a Load Label for Load combinations which then output below warnings:

Load label only works for load combinations (LOADCN), not load combinations (LCOMB).
These warnings...
如题,按三根直线创建出不规则配筋,想要给其一个钢筋编号,方便输出钢筋大样图,但编号时无反应。


想请教一下:
1、对于不规则配筋生成的钢筋如何更好的输出大样图。
2、钢筋下料单表头如何添加一列钢筋所在的图层的字段并按统一图层归纳。
Read more.您好 抱歉回复晚了
1.看您的“”钢筋形状库文件”似乎不太对,我这边软件默认的china的是可以正常进行编号的,进行正常编号之后就可以正常生成大样图

2.钢筋下料表头可以通过添加“项类型”的方式,在把钢筋所属图层加到表头显示,具体可以参考(视频50分钟左右开始介绍):PC-成果-钢筋编号与材料表输出 (bentley-learn.com)
As seen in the attached pictures.
1.For the Left column
A) foundation level is at Y1 = -0.15m
B)Floor level is at Y3 = 4m
C)Roof beam level Y4 = 12m
2.For the right column
A)foundation level is at Y2 = 2m
B)Floor level Y = 4m
C)Roof beam level Y4 =1...
Read more.Can you upload the STAAD model for better understanding?
When working...
Read more.In this article, we will delve into the various aspects of how MyMercy Login is transforming patient-centric care. From personalized treatment plans to seamless access to medical information, MyMercy is setting new standards for the healthcare industry...
Read more.This wiki explains how to enable ProStructures toolt...
Read more.What is the difference in checking hydrostatic collapse when LDOPT line is used and when HYDRO line is used?
SolutionIn LDOPT line if you activate the hydrostatic collapse option...
Read more.This wiki explains how to enable ProStructures Legacy...
Read more.Unable to assign longitudinal slope to on grade inlet in open road designer/sewergems
Correct in 10.10 no option to get slope from surface, so as Jing Jing said the edit is done with Utility property panel.
If it does not, then I would recommend using 10.12 since you have access to this latest version.
Yes Sure I will..Thanks
This wiki explains how to enable ProStructures Snaps
... Read more.Hallo zusammen,
ich weiß keinen Rat mehr.
Ich kann eine angehängte Datei im Ref-manager nicht aktivieren.
Es kommt die Meldung:
Schreibgesperrt(in Masterdatei)
Wie kann ich den Schreibschutz wieder aufheben?
In den Eigenschaften habe ich...
Read more.Hallo Herr Müller-Wissmann,
fangen wir mit dem Offensichtlichen an: kann es evtl. sein, dass die anzuhängende Datei für die Manipulation gesperrt ist oder "Application Locked" ist (s. Screenshot)?

Oder handelt es sich um eine...
Read more.

在DPoint3d strP这段代码一直报错
但是当调整代码的位置 不改变代码的时候 又可以成功运行 这是什么原因呢
能否远程看一下您的机器?可将远程ID发送至我的邮箱:hongqiang.guo@bentley.com
The SKETCH tool is far superior than smart line or composite curve
What is the key in required so that the Geometric Constraints checkbox will unckeck?
SET ITEM TOOLSETTINGS
does nothing
I tried recording a macro to find the code, but am faced with this...
Read more.Did the key-in work for your requirement?
Unfortunately, you will need to record BMR and/or VBA to get the associated variables for certain tools.
It does work, but does defeat the purpose of controlling a tool without being locked to a macro.
All of this could be avoided if the smart line tool had an arcs by edge mode
Beim Erstellen einer neuen Stücklistendatenbankdatei ohne Änderung des Dateinamens wird die alte MDB Datei nicht...
Read more.
Hi Nurfaiza,
File upload. There are also some other warning which are *** WARNING - SPECIFIED WAVE IS A NEAR BREAKING WAVE OF HEIGHT 8.4916086 M. LOADS WILL BE GENERATED. Please specify the warning and how to solve this warnings. Your help is much appreciated...
Read more.