您好，模型太大了，我给上传网盘了，麻烦了

链接：https://pan.baidu.com/s/1R59j7cgJHhwnsJ4MPhAr6A 提取码：y579

各位大佬好！

我在研究《关于一步步学习MDL-CE》的时候出了一个问题，链接是(+) 一步步学习MDL-CE[4] - 中国BDN社区-博客 - 中国BDN社区 - Bentley Communities

这其中有个代码

void createALine(WCharCP unparsed)
{
DPoint3d basePt = DPoint3d::FromZero();

EditElementHandle eeh;
      ……
}

void createAComplexShape (char...

老师们好，我在尝试图纸（Sheet Model）遍历 - 中国BDN社区-博客 - 中国BDN社区 - Bentley Communities时，编译报错如下：

目前使用的MS是10.17.02.61，SDK版本是10.17.02.09

请问可能是什么原因呢？该如何解决呢？

Hello every one, i'm a student and im about designing an offshore wind turbine structure for my project using SACS software coupled with FAST, i used a steel jacket model as a support structure and i need some examples showing how to design the transition...

According to my understanding, the numbering of diaphragms is automatic and should be different for different levels. However, in the model I have, the same number 1 is assigned to each level in the model. Does this have any impact on the analysis? In...

I've tried every method to draw a horizontal steel beam but RAM keeps drawing it off-axis/skewed as seen in the screenshot. How do I get it to just draw a horizontal beam like it normally does every other time a place a beam?

Hi,

I am new to Microstation Programming and I need to write a code in which User will run the addin after which addin will ask user to first draw the fence on the model and after that all the elements outside that fence should be reported to the user...

Levels are showing as used but when i am trying to select them no object is found.

I have also tried to select the objects using select object outside working area command but that does not work either.

Kindly help me in this regard.

Thanks

Our firm has been trying to setup Sheet Indexing and we are experiencing some issues. When we open the Explorer dialog and go to the Sheet Index Tab the necessary icons are not available.

First image shows our Sheet Index tab. Right-clicking on the 1...

Quick questions, is the UBC3D-PLM constitutive model applicable for axisymmetric conditions? If so, what kind of dynamic boundary conditions should be applied to the model?

hi,
I am trying to calibrate my water model. My field vs model static pressure matches, however the residual pressure do not match. They are off by 4 psi? What are the things that can be done to further calibrate/check to get the residual pressures to...