End Condition Exception Not Following Horizontal Feature Constraint
I am trying to apply an end condition exception to a template that has a right outside edge of pavement that is controlled by a horizontal feature constraint so the outside edge of pavement is able to vary (for example, at a turn lane taper transition…
Residual Cut/Fill Lines
I have some cut and fill lines that have appeared in my corridor model. I am unable to delete this line and it remains after deleting my template drops in the area.
The first photo shows the area with my corridor and template still there. The photo…
How can I process multiple corridors or all corridors in one file?
Answer:
In the Project Explorer, navigate to the OpenRoads Model tab,
then right-click on the filename and select "Process All Objects" from the context menu.
Keyin = GEOMETRY PROCESSALLOBJECTS
FDOT Depth Report in ORD
I am attempting to use the FDOT_Depths.xslx report in OpenRoads; however, I am receiving a kickback error:
Does anyone know how to get this report functioning in OpenRoads, or how to make a quick report to do generate the depth between template point…
Plateau intersection
In the old geopak the shape superelvation was used to crate plateau intersection. In SS4 is the recommended practice the same? Also if there is a model with a super elevation section can this be modified (extended or shrink) to make room for the plateau…
Pgl constant elevation error
In a FDOT modified template the pgl right is plotting correctly but the PGL left has a constant error and when it get to the super elevation section it gets worst.
Those anybody know why the cause PSL_1.LT_PVT_EOP_IN is not fallowing the PGL_LT.PGL…
Modeling Barrier Wall
Hello,
I'm having issues dropping a barrier wall on my template design. I can't constrain the left bottom point (TP) because it gives me an error, see attached image. Any suggestions on how to drop the barrier wall on the template and how to constrain…
Discrepancies converting existing ground TIN to DTM for use in Roadway Designer
I noticed an issue with end conditions not tying into the existing ground line drawn in cross section cells. The problem occurred at several cross section and the error varied between 0.01' to upwards of 2'. After troubleshooting, it was noticed that…
What is the Corridor Baseline?
Product(s):
InRoads, MX, GEOPAK
Version(s):
08.11.09+
Area:
Corridor Modeling
Original Author:
Sanders Thomas, Bentley Technical Support Group
Question:
When I want to create corridor, I receive a prompt to locate…
Re: Interchanges and Complex Alignments in Corridor Modeling
Importing Plan Graphics for the Corridor Modeler tools to utilize can be a tedious process. There are three (3) methods the designer can use to select plan graphics to import: Symbology, Feature and Selection Set.
The plan graphics selected to import…