Civil Cell Edge of Pavement Profile Locking in Position
I need to create a 3-referenced line driveway civil cell that has to meet two criterias for its edge of pavement: -2% slope from the driveway centerline and ties into existing terrain where the ROW begins. To add an additional constraint, I selected a…
Power Geopak (SS10) crashing when selecting PGL chain in Design & Computation Manager to plot profiles
My Power Geopak (SELECTseries 10) crashes every time I try to plot a profile. When I use the Design & Computation Manager as soon as I try to choose my PGL Chain the program freezes, and then I have to force quit it. I get the same result when trying…
Profile geometry not present in COGO SS10
I created and chained my horizontal alignment using horizontal geometry tools, created and chained a profile for that alignment using vertical geometry tools. I then change the name of my horizontal geometry and my profile no longer appears in COGO. I…
GEOPAK Corridor Modeler - Profile From Surface not working as intended for elements crossing over areas without terrain
I have an issue with the tool Profile From Surface for a complex element combining multiple ditch line and not sure if this is how it was intended to work or I'm just doing something wrong. The profile draws normally until it reaches an area where the…
How do I import Geopak Vertical Alignment information into ORD?
I can import my Horizontal alignment information using the .gpk file into ORD using the "import geometry" tool. But can not get the vertical alignment information imported.
ORD version: 10.06.00.38
Geopak Geotechnical - Visualizing Boreholes in Profile View with Station Equations
Should the borehole navigator recognize the station equations within the existing profile cell automatically? I have entered the correct chain, geopak regions, and the borings are being displayed at the correct elevations. However, after the first station…
XS Profile Grade Report
Applies To
Product(s):
GEOPAK Road PowerCivil Site
Version(s):
SS2
Environment:
N/A
Area:
N/A
Subarea:
N/A
Original Author:
Bentley Technical Support Group
…
Microstation 3d complex chain to Geopak
Applies To
Product(s):
GEOPAK
Version(s):
all
Environment:
N/A
Area:
N/A
Subarea:
N/A
Original Author:
Bentley Technical Support Group
…
Place Profile Cell
This concerns Geopak Road Tools.
When I click on draw profile, then place profile cell, it immediately goes to the placing of the cell before I can edit the station, elevation, horizontal scale, and vertical scale. Editing the text in the cell afterwards…
Geopak Water and Sewer: Invalid Profile?
I am having some problems using Geopak Water and Sewer. I have one sewer line that drains east that connects to another line that drains west. Whenever I attempt to create a profile of the second line an error window pops up saying, " Invalid Profile…
Nodes With No Width
Generating stormwater conveyance system profiles. We set up a custom drainage library, created and analyzed a network. When generating a profile of the network the nodes are shown as single lines. I haven't been able to determine where I need to define…
Plan and profile Generation_H alg with different scale
Hi Firendzzzzzzzzzz,
I am having a Problem in Plan and Profile Generation. i.e i want to generate Plan and profile with the scale of H:1:2000,V:1:500.
I am Generating profile with the exact scale. But Plan is geneating only 1:1000 or 1:1. I want…
Cross Section Annotation For Every 5m or 10 m or for a Paticular Distance
Dear All
Thankfull for Responding my Questons I Have a Another Doubt and Problem,
i am Creating cross sections in BRT it is coming good, When I am Annotating the Cross sections the offset and eelevations are showing at ground change points only…
PROFILE RAIL ELEVATION
Dear All,
I am facing a problem with rail elevation this is most importent for me to show rail elevation in the profile, our railways did'nt accept with out rail elevations,
for rail elevation again i am going to auto cad.
I am creating a horizontal…
Profile - Station Equation
Team -
I have a completed project. I have to add a station equation to my base centerline to acomplish an alignment change (long story). Now I have to incorporate that station equation into my profile(s). However, when I try to load the original…
Re: PowerCivil Profile Cell
Andres - Check the help file. There is a section on configuration variables. One of them is a variabl for setting the profile cell level:
GPK_LEVEL_PROFILE_CELL = Level Name
This will force the cell onto the named level. The color, weight…
Re: Profile - Station Equation
Team -
I think I figured out how to fiddle with the restation tool <begin station> setting to get all the VPIs after the station equation to line up. I only had to reprofile the first quarter mile and not the last 3.8 miles of the project. I also…
Geopak Road COGO - How to add Station Equation/Region where Back Sta = Ahead Sta
Hello,
Ok, I know my subject sounds like a stupid question--why would one add a station equation if the ahead station is equal to the back station? The short answer: to (possibly) cut down on work later.
Can one add a station equation to an alignment…
GeoPak Drainage - Nodes in Profiles
When I generate a Drainage Profile, I see that Library items from my DOT show up with the appropriate width and invert drop across the structure. The nodes that I create myself, however, show up as straight lines with no elevation drop. I've looked all…
Re: Profile - Station Equation
Derricke -
Thanks for the input. I tried the Restation Profile command. It seemed to work because I could now load my profiles into the Vertical Alignment tool. However, the restationing tool moved every VPI station located after the equation…
Geopak/PowerCivil - I need a profile cell for my drainage and water-sewer profiles
Ever get into a situation where you need a profile cell on your Geopak or PowerCivil drainage-water-sewer profiles? Perhaps so you can layout sheets? Or maybe you need a chain and/or profile so you can make use of the plan and profile labelers?
…