hi iam kim.
Iam modeling about mooring line which should have different segment at the end.
I read manual about ED_CLASS but I don't know how to use.
anyone have example script or have done with the commend before please help me thanks
Specific to B_CAT connectors, MOSES provides a library of lines with predefined properties. Use of this library is made with the ML_PROP command in the MEDIT menu.
Note: The library properties may not be applicable to project-specific requirements.
Hi,
I have confusion regarding how to model barge if barge partially grounded.
In this case, barge moored near shore. During low tide, partial part of barge grounded. Since the another part of barge still in water we can expect environmental load…
Take a tour of MOSES mooring system analysis capabilities with Georgina Maldonado, MOSES product Manager.
Key Points:
Multi segment line definition
Defining a buoy between segments
Defining a sensor to monitor tensions
Automated one-line damage…
Arundeepan,
It is not possible to do a coupled analysis for a floating vessel in SACS, to do this type of analysis you need to use our offshore simulation software MOSES.
You can find out about MOSES from the link below.
I hope this helps. …
Q: How do we perform a mooring analysis for the transient, one line failed case, as per API RP2SK? REV 10.00
A: The following advice illustrates how I would perform this analysis, but you need to make sure the requirements of API RP2SK are fulfilled…
Q: How can get MOSES to put the names on my mooring lines? REV 7.01
A: First you need to define a selector selection all of your mooring lines and then tell MOSES to annotate by name, using only the mooring lines; e.g.
&select :moor -sel a b c d e…
Q: We are currently determining maximum mooring loads for a single point mooring and are having problems with what looks like snap loading in the system. I have made the following variations to determine why this is happening:
time steps,
Newmark…
Q: Can MOSES perform quasi-static, one-damage, and transient mooring analyses? REV 7.00
A: In a word, yes!
Quasi-Static mooring analysis is what you get when you find equilibrium and then either compute RAOs or SRESPONSE The mooring line tensions…