I am getting this warning: WARNING- Deflection check of member # 11 will not be performed as DFF value not provided. I am sharing the input command. Please provide your view. STAAD SPACE START JOB INFORMATION ENGINEER DATE 15-May-23 END JOB INFORMATION…

As shown in the image above, a project we have has steel beams connected to concrete columns. Based on geometry alone there should be a moment applied to the column during design in the Concrete module. Added to this, the red beam on the left has a gravity…

I am looking at the requirements of the beam at the second story of the chevron BRBF. Why is RAM Frame checking Beam ductility using the Diagonal Brace requirements of AISC 341-16? The output clearly says it does not check the axial demand in the beam…

In RAM SS, how does the program distributes the lateral load (seismic and wind) in a rigid and non-rigid diaphragm? What are the differences in outcome with the different diaphragm types specified? My problem: In the picture below, I am showing a…

Hello, The moment in my frame does not seem to be correctly transferring to the fixed ends of the steel beams. All of the moment connections are set to a fixity of "XXX" and are lateral members. The ends do have moment values but seem to be way smaller…

I have got my report, but there is no loading details like dead load, Wind loads and all... In report settings i have added Loadings, but its not showing.... Wt to do???? i want to see other load details. How to get that details?

I have a 4 story building that is "L-shaped". Currently I have moment frames from the foundation to the roof in both wings and I've even tried having some down the middle. I followed the Ram Frame tutorial as best as I could (no pictures), but I seem…