3D anisotropic plate - Diferent ratios for EI1/EI2 and EA1/EA2
Hello PLAXIS team
I am interested to model a diaphragm wall in each both EI1 and EA1 ( vertical) are still 100% of the isotropic case, but EA2 and EI2 are reduced to 20% and 1% respectively. This is based on the Geotechnique paper ( ZDRAVKOVIC et al…
Masonry - PLAXIS UDSM
Application
PLAXIS 2D PLAXIS 3D
Version
PLAXIS 2D CONNECT Edition V20 Update 1 PLAXIS 3D CONNECT Edition V20 Update 1
Date created
7 January 2020
Date modified
7 January 2020
The masonry model (Amorosi et al., 2015;…
Creep-SCLAY1S - PLAXIS UDSM
Application
PLAXIS 2D PLAXIS 3D
Version
PLAXIS 2D PLAXIS 3D
Date created
22 August 2018
Date modified
21 September 2020
The Creep-SCLAY1S model is capable of simulating the anisotropic and rate-dependent behaviour…
Circular tunnel driven in elastic cross anisotropic rocks
Application
PLAXIS 2D
Version
PLAXIS 2D
Date created
26 February 2016
Date modified
26 February 2016
This movie shows how to set-up the model used in the validation document linked below. The validation concerns…
2D2011.00: Anisotropic plate properties taken as isotropic
Application
PLAXIS 2D
Issue status
Open
First Affected Version
PLAXIS 2D 2011.00
Found in Version
PLAXIS 2D 2011.00
Fixed and Released in Version
Issue #
17139
Date created
03 April 2012
Date modified…
3D Jointed Rock uses incorrect E1 and E2
Application
PLAXIS 3D
Issue status
✔ Solved
First Affected Version
PLAXIS 3D 2010.01
Found in Version
PLAXIS 3D 2010.01
Fixed and Released in Version
PLAXIS 3D2012.00
Issue #
17340
Date created
…
Anisotropic Clay Models: S-CLAY1 and S-CLAY1S - UDSM
Application
PLAXIS 2D
Version
PLAXIS 2D
Date created
02 May 2011
Date modified
02 May 2011
S-CLAY1S is an elasto-plastic model that account for initial and plastic strain induced anisotropy via a rotational hardening…
Reactor watches
.I modeled my Reactor Fallout watch over Christmas in 2008 later on I made my own modifications to the design of the face and dials The original watch has silver face with blue hands and tick marks.
