22. SAM cases are not included in AutoPIPE's code combination 2Mb2+ 2Mce, only the seismic force are being evaluated, why?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Cod combinations
Date Logged & Current Version
Aug. 2021 12.06.00.48
Problem:
SAM cases are not included in the 2Mb2+2Mce code combination.
Solution:…
0. How to apply a Static Seismic load case in AutoPIPE?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Load case
Date Logged & Current Version
June 2021 12.06.00.48
Problem:
See the following resources to learn how to apply a Static Seismic load case in AutoPIPE…
09. How to apply Seismic loads to part of model and not to complete model?
Applies to
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Modeling
Date Logged & Current Version
May. 2019 12.00.00.14
Problem:
How to apply Static Seismic G factor to part of the model, instead of the whole model…
25. How are the seismic load is calculated in AutoPIPE Vessel?
Applies To
Product(s):
AutoPIPE Vessel
Version(s):
ALL
Area:
REport
Date Logged & Current Version
April 2020 41.04.00.013
Problem:
How are the seismic load is calculated in AutoPIPE Vessel?
Solution:
The…
08. How are "Sustained + Earthquake + Seismic Displacements" combined in an AutoPIPE model?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Combination
Date Logged & Current Version
April. 2018 11.03.00.08
Problem:
How are "Sustained + Earthquake + Seismic Displacements" combined in an AutoPIPE…
PDF
Recommended non-linear seismic load combinations
Two options that are recommended for static earthquake loading.
Please keep in mind that AutoPIPE V8i Standard (09.06.xx.xx and lower) only allows up to 5 static earthquake load case, where AutoPIPE Advance and Nuclear allows up to 10 Static earth quake…
02f. "Static Earthquake" - AutoPIPE Load Case
AutoPIPE v12.05 and higher currently has the following codes available:
ALA (ASCE 2002)
ASCE (2010)
GB50011 - 2001
Mexican CFE 2008
Note :
1. For new users suggest to review AutoPIPE Tutorial document to see how Static Seismic load is…
04. How to add seismic "G factors" in an AutoPIPE model?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL
Area:
Seismic Load Case
Original Author:
Bentley Technical Support Group
Date Logged & Current Version
Dec 2014 09.06.01.10
…
06. Does friction affect SAM analysis results in AutoPIPE?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Analysis
Date Logged & Current Version
Jan. 2018 11.02.00.08
Problem:
Does friction affect SAM analysis results in AutoPIPE?
Solution:
In short, No…
06. Are seismic force applied on structural elements as well as pipe in an AutoPIPE analysis?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Date Logged & Current Version
Sept. 2017 11.01.00.17
Problem:
Are seismic force applied on structural elements as well as pipe in an AutoPIPE analysis?…
13. What is the difference regarding seismic calculation between SLS (Serviceability Limit State) and ULS (Ultimate Limit State) when using AutoPIPE Vessel?
Applies To
Product(s):
AutoPIPE Vessel
Version(s):
ALL
Environment:
N/A
Original Author:
Bentley Technical Support Group
Date Logged & Current Version
July. 2017 40.03.00.08
Problem:
Except for accelerations…
01. Can the seismic input be explained again in the new version of AutoPIPE V8i 09.06.xx.xx and higher?
Applies To
Product(s):
AutoPIPE
Version(s):
all
Environment:
N/A
Area:
Static Load Case
Original Author:
Bentley Technical Support Group
Date Logged & Current Version…