• RAM Frame and NBCC 2015 4.1.8.11 4)

    Peter Rymal
    Peter Rymal
    Hi, Based on NBCC 2015 4.1.8.11 4) single storey buildings with steel or wood deck as diaphragms can have a higher fundamental period compared to 4.1.8.11 3) as seen in the snap below. However, in the current RAM frame the Ta is only based on clause…
    • 11 months ago
    • RAM | STAAD | ADINA
    • RAM | STAAD Forum
  • RAM Frame - Joint Shape Warning for Braced Frame

    Phillip Mariner
    Phillip Mariner
    I'm getting some conflicting graphical information and output. I'm designing a special concentrically braced frame (SCBF) with wide flange beams and columns and HSS braces. The frame column webs are oriented in the plane of the frame and all beam and…
    • over 1 year ago
    • RAM | STAAD | ADINA
    • RAM | STAAD Forum
  • RAM Frame - Moderately Ductile Beam Requirements

    Tiberiu Polocoser
    Tiberiu Polocoser
    I am looking at the requirements of the beam at the second story of the chevron BRBF. Why is RAM Frame checking Beam ductility using the Diagonal Brace requirements of AISC 341-16? The output clearly says it does not check the axial demand in the beam…
    • over 2 years ago
    • RAM | STAAD | ADINA
    • RAM | STAAD Forum
  • Technical Support via Phone?

    Mike Cardellini
    Mike Cardellini
    Hi! I'm a plan reviewer with the city of San Jose. I'm reviewing a new hockey arena and I have some questions about how RAM processes automated ELF procedures and seismic drifts for structures that have collector columns. It's a BRB building, but thin…
    • over 3 years ago
    • RAM | STAAD | ADINA
    • RAM | STAAD Forum
  • RAM Frame - Masses

    Seth Guthrie
    Seth Guthrie
    Product(s): RAM Structural System; RAM Frame Version(s): Any Environment: N/A Area: Analysis Original Author: Bentley Technical Support Group Why do I get a warning about mass that's not associated…
    • over 5 years ago
    • RAM | STAAD | ADINA
    • RAM | STAAD | ADINA Wiki
  • RAM Frame - Seismic Loads [FAQ]

    Seth Guthrie
    Seth Guthrie
    Product(s): RAM Structural System; RAM Frame Version(s): Any Environment: N/A Area: Analysis Original Author: Bentley Technical Support Group How are torsional irregularities considered? In…
    • 4 months ago
    • RAM | STAAD | ADINA
    • RAM | STAAD | ADINA Wiki
  • Featured LEARN Course: Designing Steel Members According to the Seismic Provisions

    Gina Mazzulla
    Gina Mazzulla
    Take advantage of RAM Frame’s ability to accurately generate steel load combinations according to the AISC 341 Seismic Provisions. Accurately assign lateral frame types and perform a design on all lateral steel members according to the seismic provisions…
    • over 8 years ago
    • RAM | STAAD | ADINA
    • RAM | STAAD | ADINA Blog
  • RAM Frame - Steel Standard and Seismic Provisions

    Seth Guthrie
    Seth Guthrie
    The TechNotes and FAQs in this section cover various topics regarding the Frame module Steel design including Standard and Seismic Provisions in RAM Structural System. Use the navigation tree at the left to browse.
    • over 8 years ago
    • RAM | STAAD | ADINA
    • RAM | STAAD | ADINA Wiki