User-defined soil material with temperature
Dear all,
I'm attempting to implement a constitutive model containing thermal variables (temperature rate) into Plaxis. The latest reference manual shows that Subroutine User_mod Sig0(18) and Sig0(19) are the temperature at the beginning of the current…
01. How to model thermal gradient along a pipe while using AutoPIPE?
Answer:
This is akin to modeling like FEA; insert a number of short run points and vary the temperature a small amount in each run of pipe.
Step #1: Build the piping system in AutoPIPE
Step #2: D etermine what section of pipe is to have the thermal…
New releases: PLAXIS 2023.1
Join PLAXIS in becoming part of Seequent with the PLAXIS 2023.1 release
The latest releases of PLAXIS marks our definitive transition to becoming part of Seequent, The Bentley Subsurface Company, with some minor cosmetic changes and a change to the…
Reference temperature for the soil parameters and parameters depend on this
Dear All,
Maybe the following questions are the basic ones but I couldn't figure them out correctly so need your help to solve my doubt.
Questions =>
1. Why soil parameters that are inserted in any checking or Plaxis analysis should be measured…
06. How to reorder the Pressure / temperature load case pairs using AutoPIPE?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Date Logged & Current Version
Oct 2022 12.08.01.010
Problem:
How to change the order of the Press / Temp load case pairs?
Example: If model has 4 press…
04. How do I add more Temperature and Pressure Cases into a New / Existing model using AutoPIPE?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Modeling
Date Logged & Current Version
Sept 2022 12.08.01.010
Problem:
How do I add more Temperature and Pressure Cases into a New / Existing model using…
Temperature load
We want to have a look if we can also do our structural design in Plaxis. For this we need to apply a temperature load on a plate. So for i've been trying around with the thermal boundary condition, but i haven't been able to replicate the results from…
Thermal/temperature and evapo-traspiration law in Plaxis
Dear
I am using the Trial version of the Plaxis 3D Ultimate, but I could not find any options regarding the thermal/temperature specifications! I saw some of the examples of the Plaxis related to the “thermal flow”, “earth gradient”, “thermal flow boundary…
Temperatures and Pressures changing on multiple, unrelated points.
I am updating the temperatures and pressures throughout the model and found that some points on other segments are also being changed. For example, when changing a singular point, K04, to T1=700F, it is also changing points AR00 to AR02 to 700F as well…
CIBSE Calculation Not Reflecting Correct Room Temperature
Product(s):
OpenBuildings Energy Simulator
Version(s):
CONNECT Edition
Area:
Data Managers & Calculations
Subarea:
Scheduling
Overview
We might sometimes experience a mismatch in the design room temperature…
W727-2: Temperature is outside the range specified the code for Expansion for AutoPIPE
Applies To
Product(s):
AutoPIPE,
Version(s):
2004, XM, & V8i
Area:
warning
Original Author:
Bentley Technical Support Group
Problem:
Preparing input for code NB class-1 multi-operating temperature…
Unit for Temperature Loading
Applies To
Product(s):
STAAD.Pro
Version(s):
ALL
Environment:
ALL
Area:
Modeling Solutions
Subarea:
Loading
Original Author:
Sye Chakraborty, Bentley Technical Support…
Simulating Heating and Waterflow/Drying around a buried powerline
Hello there!
We're currently using Plaxis2D with its PaxFlow and Thermal Modules to simulate the behaviour of liquid soil as a filling material for buried power lines. In our case we got field data from a ton of sensors recording the actual soil-behaviour…
*** WARNING: Error reading line P/T data. not enough pressure/Temp data provided.. appears in *.msg file when importing PXF file into AutoPIPE
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Date Logged & Current Version
Sept 2020 12.04.00.13
Problem:
The following appears in the MSG file when importing a PXF file into AutoPIPE, why?
*** WARNING…
RAM Elements - Thermal Loads - Elongation due to Temperature Changes
Does RAM Elements calculate the elongation of steel beams and steel bar joists due to temperature changes? I'm working on a project that has a High Temperature of 93F, a Mean Temperature of 58F, and a Low Temperature of -2F. The Temperature Difference…
RAM Concept CONNECT Edition V8 Update 1 Release Notes
Release Date: April 2020
Version: RAM Conce pt CONNECT Edition V8 Update 1
Version Number: 08.01.00.26
Download and Installation Instructions
Current and past RAM Conce pt releases can be downloaded from Bentley Cloud Services at: http://connect…
PLAXIS 2D Thermal
Application
PLAXIS 2D
Version
PLAXIS 2D
Date created
19 February 2015
Date modified
19 February 2015
In this movie we demonstrate the possibilities of the Plaxis 2D Thermal module. Tutorial lesson 16 Freeze pipes…
Changing temperature unit in Chinese/Japanese Windows OS will give an error
Application
PLAXIS 2D
Issue status
✔ Solved
First Affected Version
PLAXIS 2D 2015.00
Found in Version
PLAXIS 2D 2015.00
Fixed and Released in Version
PLAXIS 2D 2016.00
Issue #
23328
Date created …
Modelling of Thermosyphons Foundation System
Application
PLAXIS 2D
Version
PLAXIS 2D
Date created
09 October 2017
Date modified
09 December 2020
Thermosyphon systems are passive refrigeration devices, helping to protect the permafrost to support buildings…
Geomechanical modelling of the Dutch radioactive waste disposal facility accounting for uncertainties
Application
PLAXIS 2D
Version
PLAXIS 2D
Original Author
P. J. Vardon, P. Arnold, M.A. Hicks, P.A. Fokker
Date created
23 March 2016
Date modified
24 October 2016
The current generic radioactive waste disposal…
Thermal verifications (PLAXIS)
This section contains Verification and Validation references to show the correct implementation of temperature and thermal flow behaviour in PLAXIS 2D.
How does RAM element perform temperature analysis on a steel building?
How does RAM element perform temperature analysis on a steel building?
I have a steel building and i need to analyse to analyse the building for a change of 32deg F. My lateral system for the building is BRB's, so I need to check if my temperature deflections…
TEMPERATURE LOAD
HI ALL,
I HAVE JUST NOW CLEARLY UNDERSTAND THE TEMPERATURE LOADING CALCULATIONS,
CAN ANYONE CLARIFY ME, IS IT RIGHT TO APPLY THE LOAD ALL OVER THE STRUCTURE
BECAUSE I FOUND A STAAD MODEL, IN WHICH THEY HAVE APPLIED THE LOAD ONLY ON ROOF AND…
AutoPIPE Known issue - Defect 1035676
Applies To
Product:
AutoPIPE
First Affected Version:
09.01
Found in Version:
12.02.00.01
Fixed and Released in Version:
12.02.00.09
Area:
All
Severity:
Critical
Backlog…
N56-12: Temperature dependent material properties has been updated... message appeared in AutoPIPE?
Applies To
Product(s):
AutoPIPE
Version(s):
ALL;
Area:
Note
Date Logged & Current Version
June 2019 12.01.00.10
Problem:
The following appears when making modifications in AutoPIPE:
--------------------…