• RE: Dynamic Pan

    George A. Martin
    George A. Martin
    Go to Workspace > Button Assignments > find the button combination you want (i.e. Shift+Data) In the Action for Button: Shift+Data key-in "Pan Scroll" - No "" You can Tab to another field to see the change in the listing below, then "OK" to save it for…
    • over 6 years ago
    • MicroStation
    • MicroStation Forum
  • RE: Copy cross section elements

    Shawn Cooke
    Shawn Cooke
    Yes, everything in those ORD generated sections are virtual slices of the 3D model environment (except for any cells linked to feature points in the templates or profiled elements..ie. r/w lines, etc). Even SUDA/Utilities/Geotech, are cut at exact points…
    • over 1 year ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: [ORD 2019R2] Superelevation "Reattach Corridor" Analog

    Marc Bachand
    Marc Bachand
    Does the superelevation have association with any horizontal alignment? If so, and you want to swap that to a new alignment the key in "geometry element replace" will do this....among other things. So user beware. This key in will replace all referencing…
    • over 3 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: Superelevation Labels on Plan Sets - Open Roads Annotation Group

    Marc Blancher
    Marc Blancher
    It's been approved for development but still no timeline.
    • over 2 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
    • Merlijn van Beurden
  • RE: Terrain Surface Not Appearing in Profile View

    Marcus Blake
    Marcus Blake
    My initial thoughts, would be to check the level display for the profile model to ensure terrain level is toggled on.
    • over 2 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: ORD - Create Super Single Control Control Line by Station or Lane Line

    Joe Lukovits
    Joe Lukovits
    Marc, I solved this issue. In the Plan view select the pavement lane that is not honoring the Mirror Cross-Slope. In the Project Explorer find the Transition. Change Mirror Cross-Slope to NONE. You will note in the Superlevation View the cross-slope is…
    • over 4 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: OpenRoads Designer: Top, Bottom Mesh and Alternate Surfaces in Surface Templates

    Zane Pratt
    Zane Pratt
    Needs to be a closed shape
    • over 3 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: OpenRoads Designer: Top, Bottom Mesh and Alternate Surfaces in Surface Templates

    Zane Pratt
    Zane Pratt
    I quit using the top and bottom meshes from corridors. Bottom meshes have a flaw where the mesh will create a vertical face at the edge of a template. Bentley has a new tool in ORD which creates a terrain from components , either draping from the bottom…
    • over 3 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: Using Mesh Features for Graphical Filter - sometimes chooses top and sometimes bottom

    Jan Blaasse
    Jan Blaasse
    Keith, Since the meshes are part of a corridor, depending on the settings there will also be a top-mesh. You can try to build your own surface using the top-mesh and a boundary. If that doesn't work the way you want it to, you can edit the template…
    • over 3 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: Using Mesh Features for Graphical Filter - sometimes chooses top and sometimes bottom

    jpln
    jpln
    A terrain model is a surface where you can't have same XY with different elevation. It means that the triangulation includes one or the other. There is nothing that tells the software to pick the highest. So you should remove meshes to only keep what…
    • over 3 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • RE: OpenRoads Designer starts, shuts down and & opens and closes dgn-files sloooooowly!

    kuga23
    kuga23
    Hi, You should upgrade to latest version. I believe the one you installed was earliest version and got a lot of "bug".
    • over 4 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Forum
  • Comment on Range for Horizontal Feature Constraint and for Feature Definition Point Controls

    Neal Styka
    Neal Styka
    How does this work if a point like my curb flow line is controlled in my template to be at 1' from the flange and in my template my flange line is at -15 and in my corridor I have a point control that moves it to -26. And my range is set to something…
    • over 7 years ago
    • OpenRoads | OpenSite
    • OpenRoads | OpenSite Wiki