Hi Johannes, I haven't found a true solution to this problem. But I have found that if I attach it as a reference, rather than a mesh, I can do the majority of what I need. It's still very finicky, (which is odd because both programs are made by Bentley…

Hi Drew, in my opinion the problem is your workspace configuration, which is not a default one and in my opinion is wrong. From your log (thanks for the posting, it's very helpful!) it's visible your upf file is created at very wrong place: It…

Sigfus, When I changed my Decimal Symbol from "." to ",", I experienced the same results that you describe. Try changing your computers decimal symbol to "." to see if it will populate. Holly

Valeriu, the SS10 and the SS4 version are the same generation and so can't be installed together but you can have SS2 and either SS4 or SS10. It's worth noting though that the only difference between them is the addition of CONNECT licensing at SS10 to…

Hi Damien, You can report all Flowlines (or selected set) by choosing all the flowlines (by Level for example) and then running the keyin: terrainmodel flowlines report. Im not sure why this command isnt in the Ribbon already? Attached are some…

Thank you, I found the solution from the latest post. I changed the configuration variable QV_DISABLE_D3D11 to value 1 .

I believe I found the problem. I needed to toggle on the "Physical" option. It seems to work.

To get the following cross section in ORD, my workflow was - In my cross sections, I wanted to annotate my survey features e.g. EOP etc. In this test, I used “Linear\Existing\Roadway\E_Road_EdgeOfPavement" and "Linear\Right of Way\E_ROW” features. …

Unknown said: Thanks, it works. As expected, but do you really want to restrict users that way ?! I would pull you through the telefon line if your app would do this to my user settings ;-) Maybe you have to fullfill company internal standards…