Philip: Beebe and others can help you with the original workflow you started, although it seems that you have arrived at what I think is the expected result. The utility feature lines will show as a point in the cross-sections which can then be labeled…

I was informed that there is a charge for SUE tools so I guess that option is out.

When working with Terrain Models, the best way to generate graphics from the terrain is to export it to the native product, and use the drawing/annotation tools there to display what you need. In your case, export the Terrain to a TIN file, then run the…

Surface Template would be used once the Pond is a surface for possibly putting in layers under the surface that you want to get quantities of like clay liner or stone and such. There is an analyze pond tool available in the Analysis and Reporting Task…

Thanks for the replies! I had someone suggest to reset geopak through cad conform and it force me to close the profile generator tool. So I lost the data and had to start over. It wasn't a naming issue. I used the same naming convention later on and it…

I spoke to Nico, it's all good, I mas mixing up my shape clusters and applying criteria to the wrong cluster.

The Cross Slope Optimization command has not been developed in the SS3 products yet, so for now we might have to see if any of the other reporting options might get you the data you need. One report I often use to get cross slopes is the "TransverseFeature…

Thank you for your help Nico.

I believe it is more on an informational message than a critical error. And is from a MicroStation Basic macro which was compiled into a .ba file and there is no longer a copy of its .bas file (source). Many DOT workspaces use MicroStation Basic macros…

Defect 117138 has been logged for the issue with the horizontal offset tools and intervals.

It is most likely not an end condition component

I worked with FDOT CADD Support (ECSO) on this one and they found a solution (atleast for my issue). I had Rdxsrd_shg selected as the Model and I received the exact same error message "Job number cannot be found in the active directory", when attempting…

communities.bentley.com/.../15083.runtime-error-91-when-running-cross-section-labeler.aspx

communities.bentley.com/.../15083.runtime-error-91-when-running-cross-section-labeler.aspx