Design of Solid slab (Conventional slabs)
Hello Everyone
For a while, I was using an Advanced Concrete Design (RCDC) for the design of a solid slab. Today I tried to learn the RAM concept for the slab designs but I saw a design of strips that had never seen before (When I was using RCDC and…
Dummy beam
Hello Everyone.
I create a dummy beam with density=0 and E=0 (Figure.1) then I assign the beam (Figure.2) then Staad Error occurs( ***ERROR*** MATERIAL NAME MUST NOT CONTAIN ANY BLANK SPACE )(Figure.3), What is the solution?
Lumped mass on a node
Goodevening everybody,
I wish someone can help me: how can I insert a lumped mass on a node in order to apply forces and accelerations directly on the mass? If it's possible, please, explain me how to do it from the GUI and not from the input command…
Tensile Strength Ratio (Rt) and Yield Strength Ratio (Ry)
Hi,
When editing a material, say Steel, what is the meaning of Yield Strength Ratio (Ry) and Tensile Strength Ratio (Rt)?
By default on Steel Ry = 1.5 and Rt = 1.2, and its zero for Stainless Steel, Aluminium or Concrete.
I'd welcome any assistance…
Re: section database property developed in STAADPRO is not recognized in STAAD Offshore
Hai Sye
Thanks for your kind support. my earlier problem is solved now i came up with new problem. could u please help us. we assigned few members in our model STANDARD Circular hollow sections (CHS) european Its shows section Invalid. for ex. we assigned…
Combatibilty Issues between STAAD PRO V8i SELECT SERIES 4 and STAAD OFFSHORE.
dear friends,
we are facing big combatibilty issues between STAAD PRO & STAAD OFFSHORE. some of the use facilities available in staad pro is not at all regonized by STAAD OFFSHORE. Because of this combatibility issues we are facing lots of problem…
Application of grating dead load on Structure without considering its stiffness.
Hi,
I'm currently working on a model that requires grating on work platforms.
For that purpose, I've calculated the equivalent density of the grating applied to a 1mm plate.
The reason to have it in 1mm plates is because I only want the effect…
Re: STAAD PRO: How to model an equipment with a single node in the CoG and transfer loads to other nodes
Thank you for the link AndrejLogunov, so can I set the master/slave nodes only from the input command file? Is it possilbe to set the master/slave nodes from the user interface instead of the command file?
I have no plates, I have only the beam structure…
Tension Only member with initial axial capacity
Hello to all,
In reality horizontal braces (or vertical brace, beam, etc) that is design for tension only resist "some" axial compression capacity.
Is there a way that this axial compression capacity can be input in STAAD?
For example, a horizontal…
STAAD PRO: How to model an equipment with a single node in the CoG and transfer loads to other nodes
Hallo everyone and thank you in advance for the help and the advices you will give me!!
I'm a new STAAD PRO user, I have modeled a 3 floors beam structure, on the top floor of this structure there is a filter house. The structure is loaded by some…