Hello, Does anyone have a workflow recommendation for combining photographs with point cloud data? I'm trying to make a reconstruction of a room using photos to capture the details and the point cloud will help with the plain white walls. I am using…

I have a project with sUAS photos and GCP's. I submitted Aerotriangulation, in the NAD83(2011) EPSG6447 projected coordinate system, with adjustment constraints on the control points only. All looks great and it is georeferenced. My issue is when creating…

Tengo este error CCTask.exe la aplicación no se pudo iniciar correctamente (0xc0000142) al inicio del proceso del submit aerotriangulation Mi sistema es windows10pro 64 bits con 2g de video GT openGl 4.2 y memoria ram de 20gigas, por favor alguna sugerencia…

Hi, I have a set of images with accurate image pose acquired by RTK GPS. I imported the images and image position and it looks good. Then I ran Aerotriangulation with adjustment setting to hold image position and it fails to hold the image position. Any…

I'm using Sony A7R II with 28mm lens and I'm curious why my focal length change slightly? it's a prime lens and manufacturer spec says it's 28mm and the aero-triangulation optimized the focal length in the range of 27.13mm - 27.20mm for different photogroups…

Today I´ve benn trying to procces the AT in a block of 932 pictures, but always that I start the AT it seems like CC will start it but it inmediatly fails and the CCEngine gives "[2020-Mar-11 23:51:16] Error: task failed (returned : 1)". Please help with…

Hi Expert, I did AT using images from the Mavic 2 Pro camera, the Hasselblad L1D-20c Hasselblad L1D-20c camera. However, AT results are abnormal / curved in the form of spheres. I would like advice from the experts here on how to deal with this. …

I'm flying a corridor that's approximately 2100ft x 387ft and I'm running into some issues with aerotriangulation and production results. I flew nadir pose with 75% front and side overlap at an altitude of 100 ft (restricted airspace), and came up with…

Bentley Reality Modeling SIG: ContextCapture CONNECT Edition – Update 15 Host: Casey Bentley, Application Engineer - Reality Modeling, Bentley Systems, Inc. Date/Time: 06 February 2020 - 02:00 P.M. EST Register Now Get up to speed on the latest…

I've been using ContextCapture Cloud for a while now, and there are some key functions I'm missing in the software as it is today. I’ve made a list of functions I see as key to optimize the workflow. The possibility to change coordinate system before…

Hi, I'm working on a terrain model. I have 7000 photos taken with the Phantom 4 pro. I have a working area of 5000m x 500m and 25 ground control points. I think I'll do it faster if I make all the photos aero piece by piece. I'm thinking of merging…

I'm having trouble aligning a photo dataset to a LiDAR pointcloud that was taken at the same time. Is there any better guides (more detailed than the 3 min example on youtube) or detailed settings i should be using? (suspect its spatial coord issue…

Is there any good documentation or videos on how to interpret the various components of the aerial triangulation report ? Farouk Rohoman

Bentley Reality Modeling SIG for North America: ContextCapture CONNECT Edition Update 13 - New Features Host: Casey Bentley, Application Engineer - Reality Modeling, Bentley Systems, Inc. 05 September 2019 at 02:00 P.M. EDT Register Now Did…

Hello, help deal with the problem. After aerotriangulation, most of the photos were not determined. In the Acquisition Report writes that: disconnected photos - 60%. In the Surveys tab, writes that the photo is not calibrated. And this problem concerns…

Hello! Our friend shot the entire city with the DJi Phantom 4 Pro and V2.0. He received 115,000 photos with overlapping 80% and 70%, oblique grid, 2308.9 Gpx When he tried to submit AT in CCCenter with the entire data volume, he faced a error Failing…

Hi, I've got problem with coordinate system (Kertau RSO: EPSG 3168). The potential position (yellow icon) is far away (approx 50 meters) from actual coordinates (blue icon) on ground. It also happen for coordinate system GDM2000 / Selangor Grid (EPSG…

詢問ContextCapture 官網網站是否有模型照片的範例

After adding appox. 480 photos I keep getting this result after running the AT

Hi, After my aerotriangulation had been submitted, it had a AT-report, there is a tie point resolution in the AT-report, but what does the tie point resolution really meaning? GSD? and how does it been work out? thank you very much~~~

When running AT using control points there are 2 options. The manual says: Use control points for adjustment (need a valid control point set): The block is accurately adjusted to control points (advised when control points accuracy is consistent with…

I am processing a total number of 13362 images and during the process of Aerotriangulation when it reaches a percentage of 25 it gets stuck over that percentage. I waited for a whole day but it showed no progress. So I canceled the process and restarted…

Hi, For a job I must generate a flat orthophoto generated from a film. The film is about a concrete wall under water. I've set the block type to "Vertical views only" There are no servey points available. After AT the result is not completely…

And which one correctly leave the positionning information of the model ? I don't get the difference between them. Best Regard.

I have 4500 images and 8 control points. first I have run 1000 images , After aerial triangulation 30 % photos not reconstructed .The out put of 3d view not aligned correctly. how to rectify this problem any one can suggest me. Thanks and regards…