I would like to analyze a steel stringer bridge that has a transverse nail laminated wood deck. Am I able to import this wood into the Material Library in any way?

I am pretty new to using Leap Bridge Steel, and have a question regarding a project I am working on. I have attached a general framing plan, and was wondering if Leap Bridge Steel was capable of modeling it, mainly due to the partial length girders. The…

In Leap Bridge Steel, I have a curved bridge, so the girder lengths are not integer values. Under the Member Definition tab I'm unable to manually input flange plate lengths to a sufficient decimal in order to be able to run analysis (see below for the…

Hi, In the article below it mentions that the issue where "Distance from top of concrete deck to the neutral axis of the composite section at the plastic moment was incorrectly calculated." is fixed. However, I'm still running into this problem when…

Hello. I'm wondering how LEAP Version 21.01.00.22 calculates the maximum axial load displayed in the diagram. The diagram displays a maximum axial force allowed of 1802 kips. As expected the 1802 kips doesn't change regardless of the load combination…

Does RC Pier check shear friction in the pier cap (AASHTO 5.7.4)? I've looked in the output reports and didn't see reference to this spec section. I've also looked in the application help interface and couldn't find it. Note: my application version…

I am working on the Bentley tutorials but I am confuse on how all of the Open Bridge Desiner connects to Open Bridge Modeler and Leap. do we need to start from OpenBridgeDesigner to have the Modeler and Leap work together. When I create in OpenBridge…

I am currently design 4 bridges in LEAP Steel v19 but am encountering an issue with the tool to automatically generate loads for the wearing surface of the structure. The bridges are all of a similar type, but some are wider than others and one is on…

Title: SIG Virtual Workshop: OpenBridge – Workspace Configuration in OpenBridge Designer Presenter: Steve Willoughby, Senior Application Engineer, Bentley Systems, Inc. Date/Time: June 11, 2020 2:00 P.M. EDT Register Now This OpenBridge…

OpenBridge Special Interest Group: Using a BIM or Standalone Workflow in OpenBridge Designer Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: April 7, 2020 at 2 p.m. EDT Register Now This OpenBridge…

OpenBridge Special Interest Group: Sharing Information Among Disciplines Using OpenBridge Designer Host: Alex Mabrich, Senior Application Engineer, Bentley Systems, Inc. Date/Time: March 26, 2020 at 02:00 P.M. EDT Register Now This OpenBridge…