How to change the stress limits for the intermediate bent cap from normal exposure (=0.19 sqrt(fc) <0.6ksi ) to severe exposure (=0.0948 sqrt (fc)<0.3ksi) in leap bridge concrete
I need to change the stress limits for the bent cap from normal exposure (=0.19 sqrt(fc) <0.6ksi ) to severe exposure (=0.0948 sqrt (fc)<0.3ksi)
LEAP Bridge Concrete v19 crashing and wiping model
I'm working on a two-span prestressed PCEF bulb tee bridge for a state DOT in LEAP Bridge Concrete v19. I'm new to LEAP Bridge Concrete, but I've used other LEAP products. We're at the TS&L stage, and I'm trying to get the preliminary design of the superstructure…
LEAP Bridge Concrete DW loads
How does LEAP Bridge Concrete calculate the reactions for DL-Comp. (DW)? I added up all the DW reactions and compared to a hand calc of utlities and overlay loads. The total DW is nearly 4 times greater than my hand calcs. I have 4 beam lines with 0.05…
LEAP Superstructure - Prestressing Development Length
When calculating the top and bottom stresses at the transfer and bearings, does LEAP take into account the development length? It seems that the stresses its calculating at the bearings and the transfer are higher than what they should be. Does LEAP use…