I am trying to generate cross slope report @ 10 m interval by station base or station offset report but i am not getting appropriate values of cross slope in report. It seems correctly in cross-section view. Am missing something ?? Images is ready for…

I am using Power InRoads V8i (SelectSeries 2). Is there a toggle in the cross-section annotation that would stop both elevations being displayed if they are within 0.01' of each other? The way I have my template set up, is I have a 'ditch check' point…

I am stuck with using InRoads cross-sections on a particular project, but I am considering re-creating the geometry and terrains in ORD and using ORD for the drainage design so I can take advantage of ORD efficiencies. But I must be able to display this…

Hello, I was hoping someone could help me with trying to get a new cell used in the create cross sections tool. Under the "Corridor Modeling" tab, Using the "Create Cross Sections" Tool From the "Sheet" Folder There is an option to utilize…

Hi, I would like to create cross sections in specific chainagas, I wouldn't do it one by one, so I put list of values to text file and try to use ASCi option Problem is I created few sections as on file, but I can't see terrain model line in that…

Hi I have problem to solve mass calculation when I construct a ramp with corridor modeling. There are some of the masses that are not calculated. I think there is something with the Template that I not see the solution of. Any other that have this…

Using Power InRoads V8i SS2 - V08.11.07.615 I would like to cut new cross sections and add them to an existing set. Is there a way for InRoads to sheet out the sections in order like Geopak? Thanks!

Microstation: 08.11.07.443 (SS2) InRoads: 08.11.07.566 (SS2) I have an existing surface, and I created a proposed horizontal and vertical roadway alignment (no proposed surface yet). How can I get InRoads to plot a point at the vertical curve elevation…

Starting to pull my hair out here. I'm using Inroads XM version 08.09.01.45 It seems everytime I make new cross sections or try to update old ones I am having all kinds of various problems. I usually can't get all of the components to display,…

Hi everyone, When running a cross section report with multiple surfaces, what determines the order in which the surfaces are called from inroads into the report? I'd like to be able to manage this order before calling the report so I'm not moving…

Ok here is the deal. I have a road that was originally designed to be a 4 lane parkway. Only half of it was built years ago and now part of it needs repaired and part is just getting the additional lanes and median added. Naturally I'm trying to do this…

Designing intersections in the roadway designer with the use of secondary alignments for the curb returns works WONDERFULLY... Until I have to run volumes. To mimic the secondary alignments in cross section, I currently use custom linestrings…

I have 2 sets of cross sections recently where I needed to get volumes from my cross sections that are cut at 50' intervals. Ocassionally I have had to hand end the cross sections to change a particular cut or fill or if for some reason the components…

I am having a problem using Inroads version 08.09.02.16. When I display cross sections in Microsation XM using this Inroads version, I tend to have lines missing in the finished cross sections. These missing segments are displayed in the roadway designer…

I have been trying to have Inroads xm 8.9 to display sheet number in my cross section. I have tried with a border inserted as a cell and as reference. Any help would be appreciated. Thanks

The problem I have been having is that when my corridor produces a surface for no apparent reason the surface jumps from the top of my uppermost component to a feature point in a lower component of my template - so my questions is can I force InRoads…

Using both InRoads 8.5SP7 or 8.9SP? I would like to add flow arrows to the cross sections? Suggestions? In the past I created a feature and displayed the arrow as a cell but I was never able to figure out how to make the cell be…