I am using a template with CUT & FILL Multi-slope Solutions (1:6, 1:4, 1:3, 1:2) with a priority for each one of them. My question: even with the CUT & FILL multi-slope solution, has anyone been able to create a rule or maybe a null point that would solve…

We’re trying to label our cross sections, and we are using a preset annotation group. For some reason we cannot get the tie in slopes to display. We tried using the “create list of segments tool” and that doesn’t seem to work right either. When I apply…

Hello I am working in ORD for the first time and cannot find any tools that were similar to the Cross Section Navigator tools that were available in ss10. Are there any tools that I can use to create working lines in the cross section view? We want to…

I've modelled the surface to have a constant superelevation on either of centerline but the actual surface that is produced shows otherwise. I also am not sure why I have so many components/points on the surface cross sections. I modelled it to only have…

I'm using Power GEOPAK SS2 (08.11.07.615). I have 4 adjacent stripping components in my corridor: topsoil, pavement left, pavement right, topsoil. The dynamic cross sections within roadway designer look fine, but in the traditional GEOPAK cross sections…

An issue came in today that I think will benefit the community to see troubleshooting techniques as we work toward a resolution. We are seeing discrepancies in some cases between what the modeler will show as a point offset value (or elevation) and…

(Posted on behalf of user) when drawing surfaces from roadway designer the cross section at the last sta does not draw it only draws the point names is this a tolerance issue?

I apologize ahead of time for my poor description of what I am about to ask... Is there a way in InRoads to take an exsisting DTM surface and create a template from it? We have a ditch running paralell to our road and are needing survey layout at 50…

Working in MX v8i SS2 - 08.11.07.536 - Roadway Designer. I have a scheme with a Main line and Side Road corridor which clips it. The resultant surface looks correct showing the main line being clipped by the side road, components look good as well...…

Hello, I am having trouble with some components in my cross sections not displaying. I have check the styles to make sure the display options are correct and they are since I have components of the same style displaying at different stations. Everything…

When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…

I am using Inroads Suite XM Edition. When I create my cross sections I notice that my proposed surface, in many cases, does not actually meet the existing ground surface like it should. In roadway modeler, the section views all look correct, but in the…

I am trying to create cross sections for a few various size corridors. I started with the simplest/shortest corridors. I have a template that is controlled by parametric constraints as to what object (curb and gutter, ditches, etc.) will appear. One of…

Hi, Using InRoads 8.08.00.46 and trying to generate cross sections. The problem is that some of the components are not displaying properly. For example, I have my Left lane component sloping the opposite direction in the cross sections or 2 curbs at different…