Problemas de con proceso Exportar a DWG
Tengo un problema grave. He generado todo mi proyecto en OPenRoads Designer. El cliente pide los archivos en formato DWG, entonces he exportado mis archivos a DWG. El problema se presenta cuando se abren los archivos DWG y no aparecen nada más que las…
Site design for the factory
Hi
My English may be wrong because my English is not good. We are preparing a project for the leveling of a large land at different elevations. We will prepare excavation and filling calculations. Can we do this with the "GEOPAK…
Nodes With No Width
Generating stormwater conveyance system profiles. We set up a custom drainage library, created and analyzed a network. When generating a profile of the network the nodes are shown as single lines. I haven't been able to determine where I need to define…
Re: LDD to PCi
Your are correct, the Geometry XML import is for geometry. To get the surface import from the LDD conversion go into site modeler and then Project > Import > XML
Re: Modifying default settings in Geopak for Legends, Northpoints etc
Hi Chris,
I'm not all that familiar with the Survey>Plans Preparation tools (the tools you mention appear on the Survey Menu Bar under Plans Preparation), but I took a look anyway.
It apears as though the settings for these tools is on the…
Issue with Store Offset Chain Tool (GEOPAK)
Hello,
I have discovered an error when using the Store Offset Chain tool to create a parallel chain to an existing chain. See following screen shots.
Part of existing chain; (see Image 1)
Settings used to create parallel chain; …
Re: Windows 2000 / ms V8i / Inroads V8i / PC
Hi,
Regarding PC V8i .
We have run PowerCivil V8i on Win2000 with no apparent issues BUT, be aware, we do not certify PC V8i on the Win2000 OS and there are potentially problems that we have never seen in this OS.
I know, from the…
Re: Copy Parallel Error-Site Modeler
Hi,
I didnt see anything to indicate which element was the one that could not be copied... so I just started looking at the project in general.
There was 3 elements in the Roadway Object.
The outer edge of the roundabout (which is…
Re: PowerCivil/Survey Crash
Hi Thomas,
Certification could not replicate your problem.
Please contact Support for assistance.
Thanks,
Re: License for PowerCivil for Americas V8i V 08.11.05.39
Phil,
I have contacted our Account Manager several times regarding this issue and unfortunately the best they are able to offer us is a temporary evaluation license to GEOPAK Site, which of course requires the full version of MicroStation V8i,…
Re: License for PowerCivil for Americas V8i V 08.11.05.39
Thanks Derricke, but unfortunately I still have not had any response.
Re: Transfer Geopak data to 12D software
Hi Darryl,
Yes, the MS>Drop Element tool. After you have applied that once, the triangles should be individual shapes.
I'm surprised to hear 12D doesnt have an LandXML import option... very surprised actually. If the people you are dealing…
Re: Power Civil: Force fill slope to be negative
Element>Side Slope should do the trick.
You may need to create an element when in "fill" only and enable the "enforce slope" toggle.
Instrument heights missing in PowerCivil V8i
I have just upgraded to PowerCivil for Americas V8i V 08.11.05.37 from PowerSurvey XM (as it is no longer supported).
I am in the process of creating a new dataset by importing raw survey data from a Trimble DC file and have noticed that the instrument…
Re: Water Line Profile - Pipe Deflection
Neil,
Good thought!
Only Mathew can say if it will work for his scenario, but its certainly a "left field" idea thats plausible.
Your idea is this:
Create a Horizontal alignmnet along the proposed pipe path.
Create…
Re: Geopak Site and Shape files
Hi Anthony,
It appears that you have an understanding of the process and the tools... and that the issue here may be data specific.
Please contact Support and one of the folks there will be able to work through your dataset with you.
Re: CR-Power Civil: Variable Slope Element
I understand...
I'll create and enhancement request that includes both variable slope AND linear range.
Re: Power Civil v8i preferences
Neil,
The scenario of using a XM SPF and creating a V8i Project was tested during V8i certification and all existing XM settings appeared to be maintained.
What you describe sounds like a bug...
If you can send me your XM SPF file…
Re: How to create a profile
What product do you have?
Do you wish to create an existing surface profile or a proposed (design) profile?
Re: 2D lines and smartlines for DTM
Hi,
2D linear elements can be used to build a DTM within GEOPAK using the DTM>Extract Graphics (Mode = Interpolation).
To accomplish this, the software needs two (2) pieces of information. One (1) the linear elements AND two (2) text values…
Re: PowerCivil Geopak Site Volume by FIFO
Hi Neil,
Verified! ... And a fine explanation.
Thanks,
Re: Cross Sections from tin
Hi again Matt,
I created a video and a new CCH file for you... the video should be easier to understand than the explanation I wrote.
You will need the Tech Smith codec to view the AVI. You may already have it buit, if not, go to the Tech…
Re: Modify Scale of PGL
Hi,
It is currently not possible to have the Roadway Network tools autmatically change the Profile scale once they have been created.
I tried a bunch of different things and could not "trick" the software into modifying the Profile Cell…
Re: v8i GSF vs. XM GSF
Hi Neil,
the V8i GSF's have had their format expanded for allow for future enhancements. We typically do this at a major release so that we are not making modifications at service updates.
There isn't any advantage (or disadvantage) in…