I am trying to create a terrain with my linework (all referenced in) and the edge of pavement on my roads will not triangulate although they show as part of the terrain if I try to add. I have tried removing the lines from the model and then adding them…

I've just started to analyze hydrology data in OpenRoads Designer, and I'm wondering if there is a way to compute a composite runoff coefficient in a catchment I drew by hand rather than one auto-delineated by an inlet node. I know this is relatively…

Hi! I'm trying to use Create Terrain by graphical filter. I'm using a filter group which is set up by several filters. I'm using OpenRoads 2022 R3. Problem: On the left side of the road the creation of terrain surface is working as supposed to…

I'm working on a rail design in OpenRoads Designer, and there is a gap in my 3D model. I have created a ditch alignment and profile. A ditch point is point controlled to the ditch profile to aid in ditch sloping. A part of the issue is that the end condition…

I have a terrain model I am trying to plot as my existing terrain that will not plot grayscale. I am referencing in the terrain model with the logical set to "Screen 1". I have my feature definition set to "Existing Ground" which is pulling from the CTDOT…

Hi all! I am trying to import a terrain using the Topo Import ESRI functionality. I have an ESRI/ArcGIS Online dependent user Viewer type account provided by my organisation. I have experimented with the Topo Import functionality of ORD and I…

OpenRoads Designer Connect Edition 2020 Release 3 Update 9 v10.09.00.91 upgraded from 10.08.01.033. Error appears when selecting a terrain, no properties display. File is present in C:\Program Files\Bentley\OpenRoads Designer CONNECT Edition\OpenRoadsDesigner…

Dear community, Could you please tell me that, how I can be able to insert a new point or modify the exiting point in a terrain model? Actually I would like to know that how it will be possible in CSV file and as well as in exiting terrain ( given by…

I have a problem to download terrain with CpenRoads Conceptstation, This is the message: Could you please help me? Regards Oscar

Hi I am looking to display the existing terrain contours as grey and the proposed terrain contours as black in a drawing sheet. Is there any way to do this with a complex terrain composed of the proposed and existing terrains? If not, what is recommended…

Hello, I'm trying to adapt a terrain I have modelled from elements to a road. How would you proceed? I would like to make my terrain follow the roadway that I have also modelled. If anyone could give me any input it would be greatly appreciated…

I drew 2 lines and added them to a terrain as breaklines. I then deleted those 2 lines, but their effect on the terrain remains. Since they now don't exist, I can't remove them from the terrain, because I can't click on them. What should I do here…

I can find no resources or descriptions on how to create an OpenRoads Terrain from an ESRI Shape file. Everything that I've found leads back to Bentley Map. The Shape file contains unlabeled graphical contour lines. These lines are at zero elevation and…

Hello, I have created a complex proposed terrain model in Geopak SS4. In this project, we are using a Modified State Plane coordinate system and were given a projection factor of 1.00008696. I need to give the proposed terrain .xml files to someone…

Hi, I want to create 3D terrain file from available data in TNRIS. There are some available file types: LIDAR cloud points (LAZ), Disc Image File (IMG) and corresponding XML Documents. I tried "Import terrain model from file" command in OenRoad. The…

Hello Eveyone, I have done some research and digging related to this issue already and have not be able to find an answer or better solution for what I need to do. The issue I am having is that I need to create a terrain model from 3D contours and breaklines…

Maybe I am just doing something wrong so feel free to call me out on that too. Here is the problem as it seems to occur, In PA we have some LIDAR data stored as DEMs it tends to be cleaner than the LAS data that is also provided. It actually is in PA…

How to delete the Sight Visibility Analysis report after the sight Visibility analysis is completed and the minimum sight distance is not achieved? Or We have to create the new Sight visibility scenario by changing the Speed and minimum distance requirements…

I am trying to build a template for a retaining wall in Open Roads. How do I get the depth of the retaining wall to vary with the terrain? Also, how do I add a fill end condition at the bottom of the retaining (this also needs to vary with the terrain…

I have a surface that contains features only (non-triangulated). I am attempting to add it as a corridor reference so that I can set a style constraint in my templates. When I go to add the surface as a corridor reference, it prompts me to select the…

Hi all, We have an OpenRoads model that includes some linear templates and surface templates built from MX strings and triangulations. The intention is for us to update our MX string model and MX triangulation(s) and re-import the strings and update…

I've created a terrain element in SS3 using the "Import from TIN" tool. There are voids in this terrain (based on the voids that were in the TIN) that I would like to remove. I've tried deleting and changing the feature type of the void, but no luck.…

All, I followed the steps in this video ( http://www.youtube.com/watch?v=8UON7jngtRU ) to create a terrain model from a corridor. However, the terrain model that was generated does not follow the surface of the corridor (see screenshot below - the…