Can I create cross sections or a profile in Microstation V8i using only a TIN file?
I don't have a GPK or anything. I just need a few 2D ground lines cut from a surface.
SUE/SUDA Conflict detection
I ran conflict detection on this project I'm working on and there are a few conflicts that were identified. I would like to see what the top and bottom elevations of the pipes are at the location of the conflict. Is there a way to see this?
Openroads Profile Creation
Is there a way to import a a profile not created in OpenRoads into OpenRoads? I created a profile through GeoPak and am wondering if I can save sometime and import it into vertical geometry. I'm working with Power GEOPAK v8i SS4.
[Microstation V8i S4] InRoads Startup error "failed to load INROADS.3.1.DLL"
Hello all,
I installed the current version of InRoads (ir81109918en.exe) on top of my MicroStation V8i SS4 V08.11.09.862 running on a Workstation with Microsoft Windows 10. The Installation of InRodas works fine and finished without any error message…
Complex terrain model "Object Reference not set to an instance of an object"
I have a complex terrain model that is comprised from terrain models in two reference files. The primary is an overall base mapping terrain model, and the other reference dgn contains several smaller terrain models that we are merging in to the complex…
How to Automatically get offset/elevations on fixed points on a cross-section? How to export these offset/elevations to Excel?
Hello
I am running Microstation V8i.
I need to get offset and elevations of a particular set of points on a cross-section. Is there a way to get these elevations if I fix the offset to increase by X feet after every DP? In other words; if I fix…
InRoads V8i Auto Save
Please tell me there is an autosave feature in InRoads V8i. I am so used to MicroStation autosaving every 60 seconds I sometimes forget to save my work often enough in InRoads. Thanks.
Michael Greene
InRoads Place Plan Note - Text Mask
I'm working on a project where I have a lot of spot elevation callouts and text masking is necessary. When I place the plan note, the text mask it there, no problem. But when I've had to update the notes recently, the text looses it's mask. When I update…
Geopak cogo crashing
A user has a problem with Geopak cogo crashing when he tries to list points or store curves. He has a survey project created, and opens classic cogo from the survey manager. He is able to store points, but can't list them without crashing. Also, if he…
Components not displayed
Hello all,
I am running Microstation V8i Select Series 2 with geopak. I have created a preliminary surface using the roadway designer. When I create my surface, and toggle on the display components my top surface does not appear in most locations.…
InRoads Triangle Import
I am having problems editing triangles. There are spots in my project where a high line rail crosses a road. There is about 30' difference in elevation. In top view, the vertical plane makes it difficult to use the edit surface> delete triangle. I wrote…
Corridor Modeler Cross Section Labeling error "Object variable or With block variable not set"
When I try running the cross section labeling tool out of the Corridor Modeling window I get an error
Run-time error '91':
Object variable or With block variable not set
I have the options to "End", "Debug", or "Help"
"Debug" opens VBA…
Using BrowseTriangles() in a C# addin
Does anyone know how to use or where I can find some documentation on the BrowseTriangles() function from the Bentley.Civil.DTM.DTM object.
Bentley.Civil.DTM.
DTM tin = Bentley.Civil.DTM. DTM .ImportFromGeopakTinFile(textTinFile.Text…
Showing Features in cross sections (edge of road)
Hello,
I have an existing alignment that I am using as a center line to cut my cross sections, and I have a second alignment (edge of road) that I need to show as a point on the cross section. I need to show the distance and elevation of the second…
Re: Inroadsd V8.9 at Microstation V8i
![Jason W. Smithey [Bentley Civil]](https://communities.bentley.com/cfs-filesystemfile/__key/communityserver-components-imagefileviewer/communityserver-components-avatars-00-00-00-21-72/4TFHLUWQ3890.jpg_2D00_24x24x2.jpg?_=636515530586704343)
Anders,
InRoads Group XM Edition (V8.9) is not supported in MicroStation V8i (V8.11). If you want to run MicroStation V8i, then you will need to upgrade to InRoads Group V8i (V8.11).
Thanks,
Jason Smithey
SELECTseries 3 and Workspaces
For those of you getting started, I wanted to take a moment to point out we have delivered a sample workspace to help you get started. Select the user entitled "Examples". Then for the Project select Bentley-Civil-Imperial or Bentley-Civil-Metric. Finally…
Extra cross sections
Hi all,
I'm using InRoads V8i V08.22.07.494 on Vista.
Whenever I create cross sections, there are often a few extra displayed at seemingly random stations. I only have the key stations and template drops settings checked in the Create Cross Section…
Re: Swap the point abbreviation and the station
InRoads Group V8i is only supported on MicroStation V8i, AutoCAD 2008, and/or AutoCAD 2009. I apologize for any inconvenience.
Re: InRoads starts in AutoCAD
When you select DGN on the installation, this does not determine which CAD Platform that the InRoads Group starts up in by default. This determines which files (e.g. XIN file) are used by default.
To change the CAD platform from AutoCAD to MicroStation…
Roadway Designer - pavement warping vs. superelevation
I am new to Geopak Corridor Modeler and am struggling with superelevation. Actually, pavement warping would be a better description. I have stations and cross slopes at exact locations for how we want the pavement to tip and where; at the beginning of…
Starting GeoPak
Hello
When you install Geopak it places the Geopak gfg file in the appl directory. This means that Geopak will start everytime you open Microstation. Without installing 2 instances of Microstion V8i, we want to be able to start Microstation with Geopak…
Export Geopak Reports to Notepad instead of Ultraedit
Does anybody know how to change the software that Geopak uses when exporting reports?
It keeps telling me that Ultraedit isn't loaded, which I know, but I would like to export to Notepad or Word.
Thanks in advance.
Compound Curves and Shapes
I created a geopak chain for a ramp I am designing using the store graphics tool. The ramp has a compound curve in the alignment. When I run my shape text file through the compound curve, the shape file draws an odd shape not associated with the alignment…
Pattern Area
Hi.
Is there a way. or macro or somthing to pattern area (Geopak PowerCivil v8i SS2) so that the cells stay in tact and like chess board.
Elar
Civil 3D Pipe Network Conversion
My company is trying to develop a way to utilize the intelligent Civil 3D Pipe Networks, but we are required by most of our clients to display all of our data in a 3D model in Microstation. I am trying to create a workflow to convert Civil 3D 2012 Pipe…